What message should be used to set the absolute position of the virtual needle of a loaded track given an absolute time position, f.ex. 2mins 34secs 567millisecs?
I went through all the relevant docs (I think), incl. controls and HID mappings and didn't find a clear solution. I need to match an analog CDJ's time display with Mixxx's via a timecode CD using absolute timestamps (4 tracks x 15min), i.e. time scale between CDJ/Mixxx needs to be 1:1 and clamp, not stretch. F.ex. "vinylcontrol_mode" is a 3-way switch, one being absolute, but I don't see the "set absolute time" message. "playPosition" is scaled over the length of the track loaded in mixxx, which won't match a timecode CD's track. "scratch2" affects the "absolute speed", hence the relative position. The absolute time position needs to have at least 22-bit resolution so a gentle pitch bend can go through the engine via that cursor position and behave as expected, i.e. if any scaling/compression is applied along the way it wouldn't chop off the lower bits. It's just to control track position. Precision is critical but right now latency isn't. thx, -- p ------------------------------------------------------------------------------ This SF.net email is sponsored by Windows: Build for Windows Store. http://p.sf.net/sfu/windows-dev2dev _______________________________________________ Get Mixxx, the #1 Free MP3 DJ Mixing software Today http://mixxx.org Mixxx-devel mailing list Mixxx-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/mixxx-devel
