On Tue, 5 Jun 2001, Brian Honnold wrote: > Adding map sensor to the badger 5 is very easy, you tap a vacuum line off > each throttle body downstream of the butterfly and then tie in all four > tubes into a central chamber, then output from that chamber to the MAP > sensor. > > This same thread just went around on the hardcore forum. > > As for the knock sensor, your 16v already has it, use the stock knock setup > but separate it from the motronic harness. Or use and earlier cis-e knock > setup with the early distributor and Scirocco or GTI cis-e knock brain. >
I was going to mention that... but isn't half the fun of aftermarket engine management being able to map ignition timing? Can the badger system work with a bosch distributor, or does it use coil packs? _____________ List Sponsor: http://www.netsville.com To remove yourself from this list, send mail to [email protected] with 'unsubscribe a2_16v' in the body of your message See us on the web at http://www.a2-16v.com Visit the 16V Homepage at http://www.gti16v.org
