anybody know how long it should take to throw a code?  i just warmed the 
car up one cycle on the driveway and it didn't throw any codes after, i'm 
guessing i have to go take it on a nasty drive?

i am close to taking it in for smog.  i had to go back and trace wires, 
etc. and fix previous owner crap.  i was worried about the moving timing 
light so i got another distributor, cap, rotor and wires with the #4 sensor 
that i didn't have, and the car still wanders with the light making it hard 
for me to get exact :(  i tried to leave it in a happy spot based on sound.

it turns out i have 2 knock sensors attached to the block.  #1 inbetween 1 
and 2 cylinders.  then #2 between 2 and 3!!!  i'm guessing this is 
incorrect no matter the engine and either it gets one over on the left 
side, or a second one to the right of the breather?  this is probably going 
to confused the car if i leave it as is?

they had #2 sensor hooked up correctly to the harness.  but they hooked #1 
up to the ignition reference sensor from #4 spark plug, and they cut the 
harness side of #1 knock sensor.  that damn car really did run great to me, 
it was faster then than it is now, just a bit more lumpy at idle.  so that 
is with the screwed up sensors and no 02 sensor hooked up.  it wasn't 
getting good mileage and stunk though.  i can't imagine that car being some 
kind of "limp mode"  if thats supposed to effect performance.

if the car is basically working ok i shouldn't worry about leaving the 
knock sensor #2 hooked up right?  its just tricking it into thinking its 
coming from inbetween 3 and 4?  would hate to ruin something, i was 
planning on pounding on the car tomorrow and hopefully take into smog on 
monday. 

thanks!

-- 
You received this message because you are subscribed to the Google Groups 
"MK2-16v" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to [email protected].
To post to this group, send email to [email protected].
Visit this group at https://groups.google.com/group/mk2-16v.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/mk2-16v/bf619b1d-e178-44ff-980b-9b358cf533fb%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

Reply via email to