On Tue, 2008-08-26 at 12:09 -0500, Mersberger, Robert wrote: > I would like to monitor the system temperature that is shown when one > doe the show env command on the router. > Would anyone know the OID that I would need to use to accomplish this > or maybe have a better solution.
It depends on the platform. For most recent versions of IOS, it will be in the CISCO-ENTITY-SENSOR-MIB. The OID will vary by platform and boot. If you look at the templates that I posted on Steve's site, I have an example of trolling the entity-sensor-mib at the bottom of the IOS Modularity template. Obviously, you would need to do a bit of research to determine the appropriate type of sensor to poll and what other criteria make it "interesting". On the 6500 series platforms there are 4 sensors on every card, and monitoring that many temperature settings isn't terribly useful. -- Daniel J McDonald, CCIE #2495, CISSP #78281, CNX Austin Energy http://www.austinenergy.com
signature.asc
Description: This is a digitally signed message part
_______________________________________________ mrtg mailing list [email protected] https://lists.oetiker.ch/cgi-bin/listinfo/mrtg
