> It seems there is some talk about the driver that comes with Erix...
> As far as I know the driver should work with the ASCII RS232C interface
> (only first channel),
It doesn't, Erik, because ASCII RS232C interface is memory-based,
not port-based. And I tested the fossil-driver and it didn't work. :(
> it at least works with the SONY RS232C interface which is ASCII compatible.
ASCII MSX232 Interface is not standard. :O
> The Gradiente interface is another story, a long time ago I have heard about
> this interface, but I do not have the specs or the hardware.
I could send you the ROM dump and the hardware info I have (from
manual), but the hardware info is almost nothing (at least, the serial
chip ID).
Tell me if you're interested...
Adriano Camargo Rodrigues da Cunha ([EMAIL PROTECTED])
Engenharia de Computacao - UNICAMP
http://www.adrpage.cjb.net http://if.you.dont.like.msx.usuck.com
* A hundred thousand lemmings can't all be wrong. *
****
MSX Mailinglist. To unsubscribe, send an email to [EMAIL PROTECTED]
and put "unsubscribe msx [EMAIL PROTECTED]" (without the quotes) in
the body (not the subject) of the message.
Problems? contact [EMAIL PROTECTED]
More information on MSX can be found in the following places:
The MSX faq: http://www.faq.msxnet.org/
The MSX newsgroup: comp.sys.msx
The MSX IRC channel: #MSX on Undernet
****
