|
Hello All, I have Mythtv up and running perfectly except for two nagging
sound problems: -
Sound continues to play when I exit
mythtv. -
I do not get any sound on my
recorded shows. The directions from the Mythtv documentation are as follows: With regard to using kmix: “On
the mixer page, look for Line-In on your sound card. You should see two LED's -
a green one at the top, and a red one at the bottom. The green one at the top
is for muting; you want to make sure that the green LED is a dark green,
meaning that it's "off". You also want to click on the red LED so
that it turns bright red, indicating that it's "ON"; this insures
that the Line-in is used as the source. Click OK, and make sure that you save
the settings so that this is your default.” On my
system, Line-In shows a green LED, but no red LED. With
regard to using alsamixer: “You
may also use the alsamixer program
to set the volume. First, start alsamixer
from the command line. You should start out on the "Master" volume
control slider. Use the up and down cursor to set the master volume to around
75%. Next, use the left and right cursor keys to move around on the screen
until you find the "Line" slider. Press SPACE to set it as the
capture source, set the level to around 50-75% and press "M" to mute
it. You can now press ESC to exit out of the alsamixer
program. You can also have MythTV manage all volume and mute settings, but this
will only affect the "Master" or PCM volume, not the capture volume.
See the mythfrontend setup page for options.” On my
system, I can mute the Line control, but pressing space to set it as the
capture source does nothing. It
appears as if I cannot set any capture source on my Sound Blaster Audigy 2 ZS. System
details: -
Red Hat Fedora Core 3 -
Mythtv 0.17 -
Hauppauge WinTV Go card -
Sound Blaster Audigy 2 ZS card Ralph |
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
