on multiple systems:
1. Added this line to /etc/modprobe.conf
options lirc_atiusb unique=1 debug=1 mask=0x0002
2. Pressed and held the "hand" key until the LED began to blink,
Pressed the 2 key, then Pressed the "hand" key again
3. Re-booted the system
Here's what didn't work:
1. Entries in /var/log/messages showed "data received" messages,
but the MythTV screens didn't change as keys were pressed
2. No debug messages printed by the "dprintk" subroutine
in lirc_atiusb.c were ever displayed - making debugging difficult!
I went through the documentation in the lirc-0.7.2 package,
reading "lircd.conf.atiusb", and read the output from the command,
"modinfo lirc_atiusb". I don't see where I went wrong, or left anything out.
It's gotten too late today to continue debugging this. That is, recordings
are scheduled in the next two hours. Restoring the previous /etc/modprobe.conf
restored the machine to normal operation after another reboot.
I'll continue tomorrow and into the weekend.
Can you see where I've gone wrong? Any help will be greatly appreciated.
I'll post more results of trying to setup multiple ATI Remote Wonders,
whether successful or not.
--
MM
_______________________________________________ mythtv-users mailing list [email protected] http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
