Before I get all my holes drilled I thought I would check the hole spacing and 1/4-40 tap for the switches. I was going to use nuts on the outside instead of tapping the holes but I think this will look cleaner overall. I also wanted to see what size fasteners I wanted and am going with stainless 8-32 flat head socket head screws. Here is the test piece I made from 1/8" thick aluminum angle I had laying around. I also brushed it with 80 grit sandpaper to see how it would look. I just used a sharpie to color it black to get an idea how it would look. Everything looks like it will fit ok and the tap worked perfectly for the threads on the switches.
<https://lh3.googleusercontent.com/-2T5_XgcpkvM/Wba5s1dhuAI/AAAAAAAAA9w/E5M_Q50lQAEe0y-2kEMB6zt9MswH8HHJwCL4CGAYYCw/s1600/IMG_20170911_111541471.jpg> <https://lh3.googleusercontent.com/-6GqcBW8KRd4/Wba5s2itcRI/AAAAAAAAA90/RYPTN3M2eK078--wrmEexNFoocO1-9UZACL4CGAYYCw/s1600/IMG_20170911_111616597%2B%25282%2529.jpg> > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/ff1d78de-0946-4411-9621-d31e37166a98%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
