And now we have four! Tomorrow I will install the brass rails to support the PCB and countersink all the holes. Then one last trip to the shop where they will trim the plates to shape outlined on the brass plate below. I just had a small drill press to open up the holes with the unibit but it looks like it turned out ok for my first clock project:-)
<https://lh3.googleusercontent.com/-Fe29147T_Ls/WcXNCQ9_tUI/AAAAAAAABE4/aJgJgOQ0LRsvHkPNUIj-oFW7DjMs6w3XgCL4CGAYYCw/s1600/IMG_20170922_174636532.jpg> <https://lh3.googleusercontent.com/-GqzGFB20cSQ/WcXNCa7HRvI/AAAAAAAABE4/OrPmk3eG2SIOMQ_It1J84ueXXv4EUprMgCL4CGAYYCw/s1600/IMG_20170922_181202497.jpg> > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send an email to [email protected]. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/c1f5019c-7d33-4327-9ded-fa11f8d47cf1%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
