Mine is simply a long, approximately 8" wide piece of aluminum that
has a lip that sits underneath the console for some extra support. It
isn't complex. Any metal shop in your town should be able to bang
something out pretty easily. If your console is shorter, plywood
might work just as well and it'll be cheaper.
Anybody have a spare series 1E pre/eq module?
On Jul 15, 2009, at 3:49 PM, Seamus McNulty wrote:
Hey Kyle,
One of ours was missing that piece, too.
A piece of plywood and some bolts took care of it.
How big is your board?
Seamus
On Wed, Jul 15, 2009 at 4:40 PM, Kyle Mann <[email protected]>
wrote:
Could anyone possibly send me a picture of their console stand?
I bought one on ebay, and it's missing the cross-brace that bolts
between the legs.
It appears that there is supposed to be a horizontal piece that locks
into each leg before bolting the vertical section to the tabs.
I'd love to get some pictures of how it's supposed to be before I go
and try to build something.
Thanks.
Kyle
[email protected]
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected]
with "unsubscribe neotek" in the message body. If you have any
difficulties, or questions --please send an email to mailto:[email protected]
.
The Neotek list is lovingly hosted by Catapult Web. Remember that
any message or reply sent to the list will be automatically
forwarded to all subscribers.
Vive Le Neotek!
Thanks.
