Would it be better to put two on the master output? How would that work? On Fri, Jan 8, 2010 at 3:13 PM, Ike Zimbel <[email protected]> wrote:
> Hi Matt, > That could be done, too. This card can actually be configured as a > balanced OUTPUT as well. So in your case, you would need four cards and a > mother board (which will take up to four cards). Two of the cards would be > the balanced send and the other two would be the balanced return. All of > this could be spliced into the wiring for the master fader. I think the > Series fader plates are bigger than the Elite/Elan ones that I have, so you > would have to send me the plate (or drill the holes yourself, I'm planning > on having some little mylar drilling templates made up, too). > Best, > Ike > > Matt Boynton wrote: > >> Hi Ike, how would this work with a series 1E? It doens't have insert >> points on the master. >> Matt >> >> On Fri, Jan 8, 2010 at 2:01 PM, Ike Zimbel <[email protected]<mailto: >> [email protected]>> wrote: >> >> Hi All, >> I will be ordering some circuit boards that I designed in >> co-operation with Mr. Neil Muncy (AES Life member etc., his >> circuit, my parts selection and implementation, board layout by >> another colleague of mine). These boards will, among other things, >> provide a very nice active balanced input which can be used to >> balance your master fader insert return on your Neotek. The >> board(s) fit on a small mother board that is designed to bolt to a >> blank fader plate, so they can be fitted right beside the master >> fader. >> Is anyone interested in doing this? I should be able to put this >> together in a kit form that most folks should be able to retrofit >> into their console without too much trouble. The kits would >> consist of: 2 x assembled and pre-tested balancing boards, 1 x >> motherboard mounted on a fader plate, and the power supply wiring >> for the board (the fader wiring already exists in the console). >> Let me know if you are interested as quantity ordered should >> influence final pricing. I am hoping to be able to sell the above >> in the $200.00 range. >> Best, >> Ike >> >> -- Ike Zimbel >> Zimbel Audio Productions Ltd. >> Toronto >> 416-720-0887 >> "Studio House Calls" - Repairs and upgrades to analog audio >> equipment including: AMEK, Allen & Heath, Neve, Neotek, MCI, >> Soundcraft and more. >> www.zimbelaudio.com <http://www.zimbelaudio.com> >> >> >> ------ >> >> View the list online at: >> http://www.mail-archive.com/[email protected] >> >> You can unsubscribe at anytime by sending an email to >> mailto:[email protected] <mailto:[email protected]> >> >> with "unsubscribe neotek" in the message body. If you have any >> difficulties, or questions --please send an email to >> mailto:[email protected] <mailto:[email protected]>. >> >> >> The Neotek list is lovingly hosted by Catapult Web. Remember that >> any message or reply sent to the list will be automatically >> forwarded to all subscribers. >> >> Vive Le Neotek! >> >> Thanks. >> >> > -- > Ike Zimbel > Zimbel Audio Productions Ltd. > Toronto > 416-720-0887 > "Studio House Calls" - Repairs and upgrades to analog audio equipment > including: AMEK, Allen & Heath, Neve, Neotek, MCI, Soundcraft and more. > www.zimbelaudio.com > > ------ > > View the list online at: http://www.mail-archive.com/[email protected] > > You can unsubscribe at anytime by sending an email to mailto: > [email protected] with "unsubscribe neotek" in the message body. If > you have any difficulties, or questions --please send an email to mailto: > [email protected]. > > The Neotek list is lovingly hosted by Catapult Web. Remember that any > message or reply sent to the list will be automatically forwarded to all > subscribers. > > Vive Le Neotek! > > Thanks. > > -- Matt Boynton Vacation Island Recording 90 Walton Street Brooklyn, NY 11206 tel: 347 225 3201 www.vacationislandrecording.com
