Hi Steve,
AFAIK no Neotek model had balanced insert returns.
Best
Ike
Sent from my iPhone
On 2010-01-11, at 12:15 PM, [email protected] wrote:
Ike,
I was thinking my Elan 2 already has balanced inserts for the
master fader, but perhaps not. I don't currently have access to the
console nor the schematics. Do you know whether this was ever
standard on Neotek consoles, like the Elan 2?
--
Regards,
Steve
-------------- Original message from Ike Zimbel <[email protected]
>: --------------
> Hi Matt,
> That could be done, too. This card can actually be configured as a
> balanced OUTPUT as well. So in your case, you would need four
cards and
> a mother board (which will take up to four cards). Two of the cards
> would be the balanced send and the other two would be the balanced
> return. All of this could be spliced into the wiring for the master
> fader. I think the Series fader plates are bigger than the Elite/
Elan
> ones that I have, so you would have to send me the plate (or drill
the
> holes yourself, I'm planning on having some little mylar drilling
> templates made up, too).
> Best,
> Ike
>
> Matt Boynton wrote:
> > Hi Ike, how would this work with a series 1E? It doens't have
insert
> > points on the master.
> > Matt
> >
> > On Fri, Jan 8, 2010 at 2:01 PM, Ike Zimbel
> > > wrote:
> >
> > Hi All,
> > I will be ordering some circuit boards that I designed in
> > co-operation with Mr. Neil Muncy (AES Life member etc., his
> > circuit, my parts selection and implementation, board layout by
> > another colleague of mine). These boards will, among other things,
> > provide a very nice active balanced input which can be used to
> > balance your master fader insert return on your Neotek. The
> > board(s) fit on a small mother board that is designed to bolt to a
> > blank fader plate, so they can be fitted right beside the master
> > fader.
> > Is anyone interested in doing this? I should be able to put this
> > together in a kit form that most folks should be able to retrofit
> > into their console without too much trouble. The kits would
> > consist of: 2 x assembled and pre-tested balancing boards, 1 x
> > motherboard mounted on a fader plate, and the power supply wiring
> > for the board (the fader wiring already exists in the console).
> > Let me know if you are interested as quantity ordered should
> > influence final pricing. I am hoping to be able to sell the above
> > in the $200.00 range.
> > Best,
> > Ike
> >
> > --
> > Ike Zimbel
> > Zimbel Audio Productions Ltd.
> > Toronto
> > 416-720-0887
> > "Studio House Calls" - Repairs and upgrades to analog audio
> > equipment including: AMEK, Allen & Heath, Neve, Neotek, MCI,
> > Soundcraft and more.
> > www.zimbelaudio.com
> >
> > ------
> >
> > View the list online at:
> > http://www.mail-archive.com/[email protected]
> >
> > You can unsubscribe at anytime by sending an email to
> > mailto:[email protected]
> > with "unsubscribe neotek" in the message body. If you have any
> > difficulties, or questions --please send an email to
> > mailto:[email protected] .
> >
> > The Neotek list is lovingly hosted by Catapult Web. Remember that
> > any message or reply sent to the list will be automatically
> > forwarded to all subscribers.
> >
> > Vive Le Neotek!
> >
> > Thanks.
> >
>
> --
> Ike Zimbel
> Zimbel Audio Productions Ltd.
> Toronto
> 416-720-0887
> "Studio House Calls" - Repairs and upgrades to analog audio
equipment including:
> AMEK, Allen & Heath, Neve, Neotek, MCI, Soundcraft and more.
> www.zimbelaudio.com
>
> ------
>
> View the list online at: http://www.mail-archive.com/[email protected]
>
> You can unsubscribe at anytime by sending an email to
> mailto:[email protected] with "unsubscribe neotek" in the
message body. If
> you have any difficulties, or questions --please send an email to
> mailto:[email protected].
>
> The Neotek list is lovingly hosted by Catapult Web. Remember that
any message or
> reply sent to the list will be automatically forwarded to all
subscribers.
>
> Vive Le Neotek!
>
> Thanks.
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected] with
"unsubscribe neotek" in the message body. If you have any difficulties, or
questions --please send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any message
or reply sent to the list will be automatically forwarded to all subscribers.
Vive Le Neotek!
Thanks.
