Not for an insert. I forgot to mention that you will have to wire up
four jacks that do not currently exist on your console / patch-bay:
Insert sends L & R, and Insert returns L & R. These jacks should be half
normalled, so that plugging a plug into the Return side breaks the
signal flow.
best,
Ike
Matt Boynton wrote:
Would it be better to put two on the master output? How would that work?
On Fri, Jan 8, 2010 at 3:13 PM, Ike Zimbel <[email protected]
<mailto:[email protected]>> wrote:
Hi Matt,
That could be done, too. This card can actually be configured as
a balanced OUTPUT as well. So in your case, you would need four
cards and a mother board (which will take up to four cards). Two
of the cards would be the balanced send and the other two would be
the balanced return. All of this could be spliced into the wiring
for the master fader. I think the Series fader plates are bigger
than the Elite/Elan ones that I have, so you would have to send me
the plate (or drill the holes yourself, I'm planning on having
some little mylar drilling templates made up, too).
Best,
Ike
Matt Boynton wrote:
Hi Ike, how would this work with a series 1E? It doens't have
insert points on the master.
Matt
On Fri, Jan 8, 2010 at 2:01 PM, Ike Zimbel
<[email protected] <mailto:[email protected]>
<mailto:[email protected]
<mailto:[email protected]>>> wrote:
Hi All,
I will be ordering some circuit boards that I designed in
co-operation with Mr. Neil Muncy (AES Life member etc., his
circuit, my parts selection and implementation, board layout by
another colleague of mine). These boards will, among other
things,
provide a very nice active balanced input which can be used to
balance your master fader insert return on your Neotek. The
board(s) fit on a small mother board that is designed to
bolt to a
blank fader plate, so they can be fitted right beside the
master
fader.
Is anyone interested in doing this? I should be able to
put this
together in a kit form that most folks should be able to
retrofit
into their console without too much trouble. The kits would
consist of: 2 x assembled and pre-tested balancing boards, 1 x
motherboard mounted on a fader plate, and the power supply
wiring
for the board (the fader wiring already exists in the console).
Let me know if you are interested as quantity ordered should
influence final pricing. I am hoping to be able to sell the
above
in the $200.00 range.
Best,
Ike
-- Ike Zimbel
Zimbel Audio Productions Ltd.
Toronto
416-720-0887
"Studio House Calls" - Repairs and upgrades to analog audio
equipment including: AMEK, Allen & Heath, Neve, Neotek, MCI,
Soundcraft and more.
www.zimbelaudio.com <http://www.zimbelaudio.com>
<http://www.zimbelaudio.com>
------
View the list online at:
http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to
mailto:[email protected]
<mailto:[email protected]>
<mailto:[email protected] <mailto:[email protected]>>
with "unsubscribe neotek" in the message body. If you have any
difficulties, or questions --please send an email to
mailto:[email protected] <mailto:[email protected]>
<mailto:[email protected] <mailto:[email protected]>>.
The Neotek list is lovingly hosted by Catapult Web.
Remember that
any message or reply sent to the list will be automatically
forwarded to all subscribers.
Vive Le Neotek!
Thanks.
--
Ike Zimbel
Zimbel Audio Productions Ltd.
Toronto
416-720-0887
"Studio House Calls" - Repairs and upgrades to analog audio
equipment including: AMEK, Allen & Heath, Neve, Neotek, MCI,
Soundcraft and more.
www.zimbelaudio.com <http://www.zimbelaudio.com>
------
View the list online at:
http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to
mailto:[email protected] <mailto:[email protected]>
with "unsubscribe neotek" in the message body. If you have any
difficulties, or questions --please send an email to
mailto:[email protected] <mailto:[email protected]>.
The Neotek list is lovingly hosted by Catapult Web. Remember that
any message or reply sent to the list will be automatically
forwarded to all subscribers.
Vive Le Neotek!
Thanks.
--
Matt Boynton
Vacation Island Recording
90 Walton Street
Brooklyn, NY 11206
tel: 347 225 3201
www.vacationislandrecording.com <http://www.vacationislandrecording.com>
--
Ike Zimbel
Zimbel Audio Productions Ltd.
Toronto
416-720-0887
"Studio House Calls" - Repairs and upgrades to analog audio equipment including:
AMEK, Allen & Heath, Neve, Neotek, MCI, Soundcraft and more.
www.zimbelaudio.com
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected] with
"unsubscribe neotek" in the message body. If you have any difficulties, or
questions --please send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any message
or reply sent to the list will be automatically forwarded to all subscribers.
Vive Le Neotek!
Thanks.
