Hi All,
An update on this: I picked up the circuit boards this week, and
they look great! The 1st six were built up as input balancing boards for
some Ramsa WP-9055 power amps (I neglected to mention that one of the
several uses for this board is a drop-in replacement for the now
un-obtainium SIP input modules for those amplifiers, so if you have any
Ramsa amplifiers sitting around with bad inputs...). I spent Friday
morning listening to one of these amps with the new cards in
it...sounded quite nice. Incidentally, one of the things I was listening
to was this CD, tracked and mixed on another Elite II that I installed.
This one is the most "stock" of any of the consoles I maintain.
http://www.myspace.com/flashlightradio
Yesterday, I built up the 1st Neotek insert return version, but had
to go out on a service call before I could hook it up and test it. I
hope to get to that on Tuesday of next week. After that, I am going to
install a pair in one of the Elite II's I look after and see how it
performs for a few weeks. Then I should have final pricing, installation
guides etc. and be ready to start filling orders. Stay tuned!
best,
Ike
On 1/8/2010 2:01 PM, Ike Zimbel wrote:
Hi All,
I will be ordering some circuit boards that I designed in
co-operation with Mr. Neil Muncy (AES Life member etc., his circuit,
my parts selection and implementation, board layout by another
colleague of mine). These boards will, among other things, provide a
very nice active balanced input which can be used to balance your
master fader insert return on your Neotek. The board(s) fit on a small
mother board that is designed to bolt to a blank fader plate, so they
can be fitted right beside the master fader.
Is anyone interested in doing this? I should be able to put this
together in a kit form that most folks should be able to retrofit into
their console without too much trouble. The kits would consist of: 2 x
assembled and pre-tested balancing boards, 1 x motherboard mounted on
a fader plate, and the power supply wiring for the board (the fader
wiring already exists in the console). Let me know if you are
interested as quantity ordered should influence final pricing. I am
hoping to be able to sell the above in the $200.00 range.
Best,
Ike
--
Ike Zimbel
Zimbel Audio Productions Ltd.
Toronto
416-720-0887
"Studio House Calls". Authorized Warranty service for Allen& Heath, Clear-Com,
Drawmer, Soundcraft, SPL and Yamaha. Repairs and upgrades to analog audio equipment
including: AMEK, dbx, Neve, Neotek, MCI, Soundcraft and more. Ask about our RF Frequency
co-ordination services!
www.zimbelaudio.com
------
View the list online at: http://www.mail-archive.com/[email protected]
You can unsubscribe at anytime by sending an email to mailto:[email protected] with
"unsubscribe neotek" in the message body. If you have any difficulties, or
questions --please send an email to mailto:[email protected].
The Neotek list is lovingly hosted by Catapult Web. Remember that any message
or reply sent to the list will be automatically forwarded to all subscribers.
Vive Le Neotek!
Thanks.
