Hello Pam ([EMAIL PROTECTED]),
You wrote about "[netconnect] Re: Voyager Stalling",
on Sat, 10 Jul 1999 13:49:41 +0100.
> Hello Chris,
>
> >> Can someone please tell me or give me some advice our to stop Voyager
> >> from "stalling" when accessing and downloading a web page.
>
> >This can be due to a number of factors:
>
> >b) hardware on your system affecting the serial port (be it internal or
> >external).
>
> What sort of things do you mean? Accelerator, CD-Rom? If so, how do I
> prevent them from slowing my connections?
If you are worried then list your hardware. What he means is if you
have any haradware that is cpu intnsive when used. TheA1200 onboard
IDE can be one example especially if you are still using say the
standard 14Mhz EC020.
> >f) limited number of mbuffs within the Genesis configuration. It should
> >be 1024+
>
> Whereabouts in the prefs will I find this setting? I'm using NC V2.3 and
> I've looked everywhere but am unable to find it.
Genesis Prefs, Options, Advanced. You should see a setting
"Max memory:". I think the default for this is 256, I use 512 without
problems here. If ti should be 1024+ then that should be a default or
minimum setting.
--
Jason Watson.
====================================================
Towerised A4K, WB3.1, CS-PPC 060-60 604-200 2+64MB,
CV-643D 4MB (CGfx4.1), 2.1GB IDE (PFS2), Atapi ZIP,
6x2x2 CD-RW (IDEFix97 3.4). Dynalink 33.6 Modem (NC v 2.3)
====================================================
_____________________________________________________________
NetConnect mailing list. To unsubscribe, send an 'unsubcribe'
message to <[EMAIL PROTECTED]>
