Yes/support.
I have read this draft and believe it would be very useful for enabling many
Layer 2 and Layer 3 services.
However, I do have few comments and that I would like the authors to address
once the document is a WG document.
a) Suggest to replace this text:
"These modules allow IETF forwarding protocols (such as IPv6 and VPLS) ..."
with the following text:
" These modules allow configuration Layer 2 and Layer 3 subinterfaces
(e.g., attachment circuits) for providing for IETF L2VPN (e.g., VPWS, VPLS,
EVPN) and L3VPN services".
b) The document should clearly identify the scope. For example, suggest replace
this text:
"... to interoperate with VLAN tagged traffic orginated from an IEEE
802.1Q compliant bridge".
with the following text:
"... to interoperate with traffic originated from an IEEE 802.1D,
802.1Q, or 802.1AD compliant bridge."
Note: In the data model, the draft is talking about untagged as well as
802.1AD (see "tag type (802.1Q or 802.1ad)")
c) Are there any sub-interface level common statistics counters that the
model should address? Currently, I don't see any.
Thanks,
Iftekhar
-----Original Message-----
From: netmod [mailto:[email protected]] On Behalf Of Lou Berger
Sent: Monday, December 12, 2016 3:32 PM
To: NetMod WG
Cc: NetMod WG Chairs
Subject: [netmod] WG adoption poll draft-wilton-netmod-intf-vlan-yang-04
All,
This is start of a two week* poll on making
draft-wilton-netmod-intf-vlan-yang-04 a NetMod working group document.
Please send email to the list indicating "yes/support" or "no/do not support".
If indicating no, please state your reservations with the document. If yes,
please also feel free to provide comments you'd like to see addressed once the
document is a WG document.
* Given the holiday, the poll ends December 28.
Thank you,
NetMod WG Chairs
_______________________________________________
netmod mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/netmod
.
_______________________________________________
netmod mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/netmod
