Hi, I've been running SuSE since 7.3. In 9.2, in order to use my Philips webcam, I had to compile myself the pwc module, and to have accents in Lyx, the Qt library. When I found out I couldn't burn CD's, I called it quits. With Mandrake 10.1 Official, the webcam was recognized out of the box, and accents are back. However, both before and after doing the Mandrakeonline update, both as root and user, K3b no longer burns CDs. Kernel is 2.6.8.1-12mdk; writer is IDE-LiteOn, chipset is AthlonK7AMD. Under "devices", K3b lists my LiteOn LTR-12101B as a Writer (system device name /dev/hdb, Atapi interface). Buffer remains empty, K3b finishes with "cdrecord error 254", or says it found no media. If I press "force", I get "mkisofs did not exit cleanly", "cdrecord retirned an unknown error (code 255)", "please send me an email with the last output". I know there's a compatibility problem between cdrecord and kernel 2.6.8, but I read Mandrake had solved it. This is quite obviously not so. Any help greatly appreciated. I'm new to Mandrake. I include one of the K3b debugs. Thanks
Pablo System ----------------------- K3b Version:0.11.16 KDE Version: 3.2.3 QT Version: 3.3.3 cdrecord ----------------------- scsidev: '/dev/hdb' devname: '/dev/hdb' scsibus: -2 target: -2 lun: -2 Warning: Open by 'devname' is unintentional and not supported. Linux sg driver version: 3.5.27 /usr/bin/cdrecord: Warning: using inofficial libscg transport code version (warly-Mandrakelinux-scsi-linux-sg '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling'). SCSI buffer size: 64512 Cdrecord-Clone 2.01-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 J�rg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to <[EMAIL PROTECTED]>. Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM Using libscg version 'schily-0.8'. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 1 Vendor_info : 'LITE-ON ' Identifikation : 'LTR-12101B ' Revision : 'LS38' Device seems to be: Generic mmc CD-RW. Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96P RAW/R96R Drive buf size : 1994752 = 1948 KB Drive DMA Speed: 12980 kB/s 73x CD 9x DVD FIFO size : 4194304 = 4096 KB Track 01: data 0 MB Total size: 1 MB (00:06.34) = 476 sectors Lout start: 1 MB (00:08/26) = 476 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Is not unrestricted Is not erasable Disk sub type: Medium Type B, low Beta category (B-) (4) ATIP start of lead in: -12369 (97:17/06) ATIP start of lead out: 359849 (79:59/74) Disk type: Short strategy type (Phthalocyanine or similar) Manuf. index: 69 Manufacturer: Moser Baer India Limited Manufacturer is guessed because of the orange forum embargo. The orange forum likes to get money for recent information. The information for this media may not be correct. Blocks total: 359849 Blocks current: 359849 Blocks remaining: 359373 Speed set to 1411 KB/s Starting to write CD/DVD at speed 8.0 in dummy TAO mode for single session. Last chance to quit, starting dummy write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. trackno=0 BURN-Free is OFF. Turning BURN-Free on Starting new track at sector: 0 Track 01: 0 of 0 MB written. /usr/bin/cdrecord: Success. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 02 00 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x02 Qual 0x00 (no seek complete) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63488 cmd finished after 0.981s timeout 40s /usr/bin/cdrecord: A write error occured. /usr/bin/cdrecord: Please properly read the error message above. write track data: error after 0 bytes Writing time: 6.009s Average write speed 1.1x. Fixating... WARNING: Some drives don't like fixation in dummy mode. Fixating time: 0.002s /usr/bin/cdrecord: Success. start/stop unit: scsi sendcmd: no error CDB: 1B 00 00 00 02 00 status: 0x4 (CONDITION MET/GOOD) cmd finished after 40.338s timeout 40s /usr/bin/cdrecord: Cannot eject media. /usr/bin/cdrecord: fifo had 16 puts and 1 gets. /usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. cdrecord comand: ----------------------- /usr/bin/cdrecord -v gracetime=2 dev=/dev/hdb speed=10 -tao -dummy driveropts=burnfree -eject -data -tsize=474s - mkisofs ----------------------- 474 Total translation table size: 0 Total rockridge attributes bytes: 250 Total directory bytes: 0 Path table size(bytes): 10 Max brk space used 0 474 extents written (0 MB) mkisofs comand: ----------------------- /usr/bin/mkisofs -gui -graft-points -volid K3b data project -volset -appid K3B THE CD KREATOR VERSION 0.11.16 (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer K3b - Version 0.11.16 -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-pablo/k3b8RESJb.tmp -rational-rock -hide-list /tmp/kde-pablo/k3bC8nBMa.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-pablo/k3bXeLWCb.tmp /home/pablo/.kde/share/apps/k3b/temp/dummydir0/
____________________________________________________ Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com ____________________________________________________
