Yes, I have looked through and tried all of the various configuration settings with each of the listed laptops. Each of these seem to look correct, and I have tried each one.
There is not a direct listing for the N3210 and after my ordeal, I am going to be writing on for this laptop. Matt -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of Robyn Manning Sent: Sunday, February 24, 2002 9:53 AM To: [EMAIL PROTECTED]; Matt Sickles Subject: Re: [Newbie]X Configuration Problems: Redhat 7.2 -- XFree86 -- HP Pavilion N3210 Laptop Have you tried http://www.linux-laptop.net it has various HP Pavilion laptops listed. Robyn On Mon, 25 Feb 2002 00:47, Matt Sickles wrote: > After working for several days I am no closer than before in getting > my HP Pavilion N3210 laptop up and running. I get the macro 320x240 > view and that is all that is available to me. > > I have experimented with a lot of settings within the XF86Config files > and am pretty convinced I have it down to the "Monitor" settings as > the issue. > > I am almost 100% confident that the section I have for the driver is > correct, but I could use any help available for the monitor refresh > settings. > > I have looked through the list archive but found no reference for the > N3210 HPA LCD settings. Anyone who has this information and could > share it I would be greatly appreciative. > > XF86Config > ---------------- > > Section "Monitor" > Identifier "LaptopLCD" > VendorName "Hewlett Packard" > ModelName "LaptopLCD" > HorizSync 31.5-37.9 > VertRefresh 55-90 > ModeLine "800x600" 36 800 824 896 1024 600 601 603 625 > Modeline "800x600" 40 800 840 968 1056 600 601 605 628 > +hsync +vsync > Modeline "800x600" 50 800 856 976 1040 600 637 643 666 > +hsync +vsync > Modeline "800x600" 60.75 800 864 928 1088 600 616 621 657 > -HSync -VSync > Modeline "800x600" 69.65 800 864 928 1088 600 604 610 640 > -HSync -VSync > EndSection > > Section "Device" > Identifier "Trident CyberBlade i7d" > VendorName "Trident Microsystems" > BoardName "Trident CyberBlade i7d" > Chipset "cyberblade" > EndSection > > Section "Screen" > Driver "svga" > Device "Trident CyberBlade i7d" > Monitor "LaptopLCD" > DefaultColorDepth 16 > BlankTime 0 > SuspendTime 0 > OffTime 0 > SubSection "Display" > Depth 8 > Modes "800x600" > EndSubSection > SubSection "Display" > Depth 16 > Modes "800x600" > EndSubSection > SubSection "Display" > Depth 24 > Modes "800x600" > EndSubSection > EndSection > > _______________________________________________ > Newbie mailing list > [EMAIL PROTECTED] > *** To unsubscribe , or change message options, see: > http://XFree86.Org/mailman/listinfo/newbie _______________________________________________ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie _______________________________________________ Newbie mailing list [EMAIL PROTECTED] *** To unsubscribe , or change message options, see: http://XFree86.Org/mailman/listinfo/newbie
