Yes On 2/9/09, wanetor <[email protected]> wrote: > > > Ok today i checked for any leak or stuck cable but it looks ok .when i > started the engine it goes at 1000rpm but when it warm up it jump to > 5000rpm. > I would like to know if it's ok to have one hose for the gaz and 2 for > the air? > > On Feb 9, 7:55 am, wanetor <[email protected]> wrote: > > Ok Im going to do what you have suggested, I did a complete > > restoration of my NightHawk, the carbs are 25 years old and i started > > to have problems with it . So I had 2 sets of carburators for my > > motorcycle,I savaged both and i took the best parts to rebuild the new > > carb set so I bought from Honda many parts, the jets slow are new, the > > jets main new,all floats level new,also all the gaskets, 2 valve > > floats are old but still in very good condition and 2 are new,the > > vacuum pistons are old but they look like new.What I did is first i > > took photos before i started my work and after that I disassembled all > > the carbs in sequence, then it was easy to rebuild .I cleaned inside > > the carbs with a good degreaser . After that I rebuilt all the carbs > > together. For the pilot screws I pre set them like honda wanted 2-5/8 > > turns out.I loose all the cables (throttle and choke). > > I wish this information help you > > > > On Feb 9, 1:20 am, Dennis Hammerl <[email protected]> wrote: > > > > > > > > > WHOA ! what parts did you change? how and why ? When something is this > wrong, STOP and start over. Take your time and write out slowly what you did > (and why) so we can have a better idea of what you're doing. Give us some > history of this bike and what caused you to attempt to change whatever. > Don't try to be brief, write a book if you have to. The more we know, the > easier it gets to help.We need to know if you separated the carbs from the > runner and what parts you disturbed. They were removed, right ? > > > > > --- On Sun, 2/8/09, wanetor <[email protected]> wrote: > > > From: wanetor <[email protected]> > > > Subject: [Nighthawk Lovers] Nighthawk CB550CS Idle too high > > > To: "Nighthawk Motorcycle Lovers!" <[email protected]> > > > Date: Sunday, February 8, 2009, 8:08 AM > > > > > I change all the parts of my carbs and also i loose all cables but my > > > idle goes at 5000 rpm and more . I played with the throttle stop > > > screws but no effect on the idle. So what i doing wrong? can you help > > > me?- Hide quoted text - > > > > - Show quoted text - > > >
--~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en -~----------~----~----~----~------~----~------~--~---
