Got the new bike and I am going through to get everything functioning. The brakes were locked, I took them off, pressed the piston back in, flushed with new fluid and they seem to be doing well. I plan on rebuilding them as soon as I get everything functioning. No point in spending money on something before assessing the whole bike.
The clutch: the master cylinder was pretty much dry. The clutch wound not engage and there was no resistance on the lever. So I flushed the system with new brake fluid. The bleed hose was coming out clear and I was getting a lot pushed out with every squeeze. But- I never got any resistance on the lever, the clutch would still not engage. What should I look for next? I haven't started the bike yet and no battery is hooked up at the moment. Thanks- --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected] To unsubscribe from this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en -~----------~----~----~----~------~----~------~--~---
