My first response would be that you need to roll your starter over. Put the 
bike 
in 1st gear and roll it forwards a few feet. This will roll the starter to a 
different spot and it may then engage. It sounds like a starter problem to me. 
HotrodMamma.




________________________________
From: Joey Kelley <[email protected]>
To: [email protected]
Sent: Sun, August 1, 2010 7:41:52 AM
Subject: Re: [Nighthawk Lovers] Tech help: clicking sound when trying to start  
up

My first thought is that the click is the relay but the starter isn't engaging 
- 
I would take a stab and say either the engine is stuck or the starter is bad. 
           Just my first impulse however.
           Are you able to turn the engine over by hand?
           -Joey


On Sun, Aug 1, 2010 at 9:30 AM, McMean <[email protected]> wrote:

My '84 CB450SC is slowly coming along.  Right now, I was hoping to
>hear it start to turn over, but alas, just a clicking sound.
>Some info:
>-Cleaned the tank out, fixed leak, new fuel
> - new battery, charged
>-was missing starter relay, so found one at the wreckers - however, in
>installing it, I have a blue wire with red stripe coming out of the
>harness but nowhere to plug it in to
>- clicking sound coming from crankcase/starter
>- jumping the starter relay produces some nice sparks, but does not
>help engine turn over
>
>So, I'm wondering what you would recommend my next step be.  Carb?
>Starter itself?  Spark plugs?
>I've found a lot of info on the net but it's all jumbled, would LOVE
>it if greater minds than mine could say, 'Hey, try this order of
>replacement' so I'm not just shooting in the dark.
>
>Thanks for any insight,
>Daniel
>
>--
>You received this message because you are subscribed to the Google Groups 
>"Nighthawk Motorcycle Lovers!" group.
>To post to this group, send email to [email protected].
>To unsubscribe from this group, send email to 
>[email protected].
>For more options, visit this group at 
>http://groups.google.com/group/nighthawk_lovers?hl=en.
>
>


-- 
-Joey Kelley
Need Computer Technical support?
http://www.crossloop.com/JoeyKelleyComputerServices
At your service - via remote control!

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/nighthawk_lovers?hl=en.



      

-- 
You received this message because you are subscribed to the Google Groups 
"Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected].
To unsubscribe from this group, send email to 
[email protected].
For more options, visit this group at 
http://groups.google.com/group/nighthawk_lovers?hl=en.

Reply via email to