You're probably correct I just eyeball mine to where it is about a 1/4 inch away from the swing arm since loose is better than tight. Sent via BlackBerry by AT&T
-----Original Message----- From: Kurt Nolte <[email protected]> Sender: [email protected] Date: Sun, 27 Mar 2011 21:02:41 To: <[email protected]> Reply-To: [email protected] Subject: Re: [Nighthawk Lovers] Re: Hi! '92 CB750: Rattle on warm engine,Low-RPM, Low MPH an inch and a half seems really loose. I adjusted my own chain to 3/4" which is on the low end of the Honda spec. -Kurt On Sun, Mar 27, 2011 at 8:53 PM, Allen Thomas <[email protected]> wrote: > Speaking of the chain. Be careful to leave some slack in it (about 1.5 > inches) if it is too taught it can mess up the counter shaft bearing. Too > loose and it will slap the swing arm and feel clunky. > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en. -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
