Good. As long as you have a way to test it I'll feel better recommending the product I used ;) Por15, it worked out well. That's the only tank I've done so I can't really compare it to the other products but I'd use it again if I had to.
-Kyle On Jul 2, 2011 3:50 PM, "Pat Patterson" <[email protected]> wrote: > I used to build hydralic tanks... It'll get balloon tested for an > hour before I trust it. > > I'm thinking I'm going to have to braze the holes up :o( That's a > hassle cause I'm a cheap bastard and use oxy/propane to cut with, you > have to use oxy/acetylene to weld/braze. > > At 01:35 PM 7/2/2011, you wrote: > >>I've sealed a tank before and it worked fine but like Graham it >>didn't leak to begin with. The salvage yard by my house has a >>completely burned up NH650 from a leaky tank that the guy parked >>next to his gas water heater. Burned his house down too. I'd test >>the hell out of it in a well ventilated area before trusting it. >> >>-Kyle >>On Jul 2, 2011 3:31 PM, "Graham Rogers" >><<mailto:[email protected]>[email protected]> wrote: >> > I've had several tanks lined. The first one I did myself. I used >> > the 3 part process from JC Whitney. It was a messy, long process but >> > worked fine. The tank didn't leak to begin with however, just lots >> > of rust that clogged the carbs (a 1987 Suzuki GS450). The next >> > several tanks I had done by a radiator shop in the area. They >> > charged $75 - $95 and did a good job on the inside of the tanks. >> > They botched up the paint work on two of them. Not sure whether to >> > do the next one myself or have the shop do it. I haven't had any >> > done that leaked to begin with, Graham >> > >> > On Jul 2, 2011, at 2:54 PM, Pat Patterson wrote: >> > >> >> I have several rust pin holes at the bottom of my tank. Cleaning >> >> isn't always a good thing :o( >> >> >> >> Anyone have good luck with sealers or coatings? There is too many >> >> small pin holes to try and braze them up. Or I'd rather not anyway. >> >> >> >> Pat Patterson >> >> Abbotsford, BC. >> >> >> >> Notice: >> >> >> >> This email is confidential and should not be used by anyone who is not >> >> the original intended recipient. It should not be photocopied, >> >> transmitted via walkie-talkie, CB radio, satellite dish, cable TV, >> >> overhead projector, smoke signal, Morse code, pig Latin, sign >> >> language, short hand, or any other means. This email is under no >> >> circumstances to be translated into French. Do not taunt or provoke >> >> this email. People taking certain prescription medications may >> >> experience nausea, dizziness, hysteria, vomiting, and temporary loss >> >> of short term memory while reading this email. Please consult your >> >> physician before reading this email. All models depicted in this email >> >> are 18 years of age or older. If you have received this email in >> >> error, it's probably because I was drinking when I typed the email >> >> address. >> >> >> >> Please consider the environment before printing. >> >> >> >> -- >> >> You received this message because you are subscribed to the Google >> >> Groups "Nighthawk Motorcycle Lovers!" group. >> >> To post to this group, send email to >> >> >> <mailto:[email protected]> [email protected]. >> >> To unsubscribe from this group, send email to nighthawk_lovers >> >> +<mailto:[email protected]>[email protected]. >> >> For more options, visit this group at >> <http://groups.google.com/>http://groups.google.com/ >> >> group/nighthawk_lovers?hl=en. >> >> >> > >> > -- >> > You received this message because you are subscribed to the >> Google Groups "Nighthawk Motorcycle Lovers!" group. >> > To post to this group, send email to >> <mailto:[email protected]> [email protected]. >> > To unsubscribe from this group, send email to >> <mailto:nighthawk_lovers%[email protected]> [email protected]. >> > For more options, visit this group at >> <http://groups.google.com/group/nighthawk_lovers?hl=en> http://groups.google.com/group/nighthawk_lovers?hl=en. >> > >> >>-- >>You received this message because you are subscribed to the Google >>Groups "Nighthawk Motorcycle Lovers!" group. >>To post to this group, send email to [email protected]. >>To unsubscribe from this group, send email to >>[email protected]. >>For more options, visit this group at >>http://groups.google.com/group/nighthawk_lovers?hl=en. > > Pat Patterson > Abbotsford, BC. > > Notice: > > This email is confidential and should not be used by anyone who is not > the original intended recipient. It should not be photocopied, > transmitted via walkie-talkie, CB radio, satellite dish, cable TV, > overhead projector, smoke signal, Morse code, pig Latin, sign > language, short hand, or any other means. This email is under no > circumstances to be translated into French. Do not taunt or provoke > this email. People taking certain prescription medications may > experience nausea, dizziness, hysteria, vomiting, and temporary loss > of short term memory while reading this email. Please consult your > physician before reading this email. All models depicted in this email > are 18 years of age or older. If you have received this email in > error, it's probably because I was drinking when I typed the email > address. > > Please consider the environment before printing. > > -- > You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to [email protected]. > For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en. > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
