YES. YES YES YES. Sincerely, The group.
-Kurt On Jul 25, 2012 11:06 PM, "E.T." <[email protected]> wrote: > Pulled the carbs. > Cleaned all the jets. > The choke was almost locked shut because of that cleaner my brother used. > It had crystals in it which jammed the bystarter valve... Took half a can > of cleaner through there to even be able to pull them from their seats. > Crystal buildup on the springs, in the valve seat, EVERYwhere. Got that > cleaned up and the choke reassembled, slides smooth now. > Vacuum piston isn't sliding perfectly smoothly on 2 and 4 they're getting > caught at the top of the slide. > > Would these be the causes of my issue? Leaving the carbs off for the night > to finish tomorrow > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To view this discussion on the web visit > https://groups.google.com/d/msg/nighthawk_lovers/-/sdpd8_CU4LAJ. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/nighthawk_lovers?hl=en. > > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en.
