I definitely wouldn't tap into a siezed stud. Are the bits you got left handed or right handed?
-Kyle On Wed, Sep 16, 2015 at 5:31 PM, Alexander Press <[email protected]> wrote: > I beat on the thing every which way with a punch, a large punch, and had > my mechanic weld a nut to it and she wouldn't spin out. That actually ended > up snapping the nut. It's not flush with the head but maybe a an 8th - > quarter inch is protruding from the head. I tried hammering a socket onto > it a while back and it wouldn't budge. I'm really not sure why it stuck in > there so good. It really gets me goin when I think about it. Small things > tend to upset me a lot more than "big" stuff. Anyway, I got a set of drill > bits and bought a 8mm tap with an "H" bit that's made a hair smaller than > 8mm. Hopefully I can work my way up to the H bit leaving only the threads > and can pick them out or maybe I'll get lucky and the stud will collapse. > I've been thinking, could I get a 6mm tap and drill a 6mm hole into the > seized stud? And just use a 6-6mm straight bolt as my anchor for the flange? > > -- > You received this message because you are subscribed to the Google Groups > "Nighthawk Motorcycle Lovers!" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > To post to this group, send email to [email protected]. > Visit this group at http://groups.google.com/group/nighthawk_lovers. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at http://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
