Working on my son's bike, its been a basket case, combining two bikes to complete one. I replaced the left-side control switch assembly and also added the instrument cluster. After connecting those units, the headlamp quite working (and yes, I did verify that the bulb works). I even tried reverting back to the old switch assembly and unplugging the instrument cluster. Still not working. Interesting note: when I have everything connected including the headlamp, the hi-beam indicator remains lit regardless of the hi-beam switch setting; when I disconnect the headlamp, the indicator works as expected.. I verified that the switch assembly is wired correctly and does not short. I also checked the fuses and the connections on the back of the fuse panel. I'm stumped. Another interesting note: I'm trying to wire up blinkers (after-market lights and housing). I replaced the flasher unit. The blinkers will flash once and that's it. I would appreciate any insight anyone may have. Thanks!
-- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/nighthawk_lovers. For more options, visit https://groups.google.com/d/optout.
