I’d measure the voltage at each switch (on/off at the right handle, high/low at the left), on either side of switch to see at which station it’s interrupted. Could it be a ground issue?
> On Jun 11, 2019, at 7:44 PM, Graham Rogers <[email protected]> wrote: > > Tonight I put a volt meter on the headlight plug. White wire was about 9 > volts with nothing at the blue, which is meant to be at 12 when going high > beam. Tried switching both hand controls, left and right. I even tried > another whole gauge cluster. No different. Where does the head light get it’s > power? -- You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/nighthawk_lovers. To view this discussion on the web visit https://groups.google.com/d/msgid/nighthawk_lovers/1BEB4336-DDE0-417E-BE46-B150C7A91350%40shadowbrush.com. For more options, visit https://groups.google.com/d/optout.
