On December 03 2002, Erik Richard S�rensen <[EMAIL PROTECTED]> wrote:
>Hei Brian > >Yes, the LW 300 is not a PS printer. It's only a TT printer with the old standard >8-pins serial connector, and there are no ways of changing / connecting it to any >kind of Ethernet / Ethernet bridge.... So this printer >is infact worthless together with the OS X in any version. ===== >From search for *laserwriter* using Find in OS X 10.2.2, I found 157 files of which >perhaps 100 related to Apple Laserwriter printer drivers with, again, sometimes 4-6 >different files for one model. I did note Apple Personal LaserWriter NTR was there but not NT, so it does appear that only Postscript printers which can connect via Ethernet are supported. I connect from my iBook via Ethernet to a router/hub which then connects also via Ethernet to the LW IIg. I note that on the router there is a 25 pin connector labelled *Printer*. Not being too clued-up about these things, I assume that I could use that to connect to the printer as well but .... this would only work if the correct printer driver(s) were available. Catch 22, sort of. I'll ask around my local experts to see if they have any ideas. ================================= Regards from Brian Ferguson Mac OS X 10.2.2 & Nisus Email X 1.6.1 ================================= --------------------------------------------------- The Nisus Interactive List [EMAIL PROTECTED] Searchable archives: http://www.mail-archive.com/nisus-interactive%40nisus.com/ To unsubscribe from this list please send a message with "unsubscribe nisus-interactive" in the body of the email to [EMAIL PROTECTED]
