The filter syntax is the standard bpf (Berkeley Packet Filter) syntax, used
by most libpcap programs.

host 192.168.1 is an invalid filter - or it may be interpreted as
0.192.168.1 or 192.168.0.1... (may just be a typo below)


1. Try double quotes .... -B "" not -B '' ... depending on which shell
you're using, things get interpreted differently.

2. Install tcpdump - it's a packet grabber which also uses bpf.  That way
you can get a quick, real-time feedback on tuning the filter:

$ tcpdump -c 5

will show the 1st 5 packets

$ tcpdump -c 5 -i eth1

will show the 1st 5 packets on eth1

$ tcpdump -c 5 -i eth1 net 192.168.1.0/24

will show the 1st 5 packets on eth1 for the 192.168.1.x network (it's the
same as your net mask syntax, just less to type)

etc.

ppp links are strange - you may really need to look at the traffic on the
link to craft the right filter.

-----Burton


-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Hendrik Friedel
Sent: Saturday, August 17, 2002 5:31 AM
To: [EMAIL PROTECTED]
Subject: [Ntop] Filtering


> -B option

I've tried that.
But if I limit it to
# ntop -i ppp0 -B 'net 192.168.1.0 mask 255.255.255.0', it
has no effect # ntop -i ppp0 -B 'host 192.168.1', doesn't do
the trick as well.
Sorry, I'm a not very familiar with linux yet. Could you give
me a hint?

Hendrik
_______________________________________________
Ntop mailing list
[EMAIL PROTECTED]
http://lists.ntop.org/mailman/listinfo/ntop

_______________________________________________
Ntop mailing list
[EMAIL PROTECTED]
http://lists.ntop.org/mailman/listinfo/ntop

Reply via email to