What you are seeing is the traffic FROM your users to outside (remote)
sites... and the replies.  Perfectly as expected...

Say you browse a page at www.yahoo.com (and let's ignore DNS for
simplicity).

Your web browser (on 192.168.x.y) opens a TCP connection from port
(something) to www.yahoo.com:80

    ntop sees a packet FROM 192.168.x.y:zzzzz TO a.b.c.d:80 and records both
hosts.

Yahoo sends back a reply from www.yahoo.com:80 to 192.168.x.y:zzzzz

    ntop sees a packet FROM www.yahoo.com:80 TO 192.168.x.y:zzzz and records
information about both.

The only way to strip off the remote traffic would be to use filters to
eliminate non-local traffic.

-B "net src 192.168.x.0/24 and net dst 192.168.x.0/24"

(I probably munged the syntax, but you see what I'm getting at - the AND -
so that only packets 'tween your network hosts are recorded)

Why you would want to do this - since it would underreport 98% of your
traffic based on the sample packet traces you sent - I have no clue.  But
that's how...

-----Burton

-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Hendrik Friedel
Sent: Tuesday, August 20, 2002 9:26 AM
To: [EMAIL PROTECTED]
Subject: Re: [Ntop] Filtering


> on the ppp0 interface is the traffic from the internetwork to
> your site and vice versa.  That traffic is addressed to you
> at the 64. or 24. or whatever address.

ACK

> Internal network traffic has the 192.168.1.x/24 address.
> Your gateway/router handles some of that doing the NAT.  But
> traffic between nodes on that address just flows PAST the
> ntop host, not through it.

I was not aware of this. Ok

> If you want to monitor that traffic, then you need -i eth0,
> not -i ppp0

Ok, so I use the eth0 device.
But then I don't see a way to *only* display the hosts in MY network.
If I use 'host 192.168.1.31' as filter, I get in 'NetworkTraffic: Data
Received'
192.168.1.31 (this is what I want)
[website1] (this is what I don't want)
[website2] (..)
[website3] (..)
[Router]   (..)

I really can't think of a way not to display these. Could you give me a
hint?

Hendrik

_______________________________________________
Ntop mailing list
[EMAIL PROTECTED]
http://lists.ntop.org/mailman/listinfo/ntop

_______________________________________________
Ntop mailing list
[EMAIL PROTECTED]
http://lists.ntop.org/mailman/listinfo/ntop

Reply via email to