No, I *don't* know - that's why I told you to use tcpdump to MONITOR the traffic and SEE what's really there. Just because your NIC card's IP is 192.168.0.2 or whatever doesn't mean that that's what's on the PPP link.
Did you do the tcpdump tests in the order I suggested? What did they show? -----Burton -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Hendrik Friedel Sent: Saturday, August 17, 2002 10:26 AM To: [EMAIL PROTECTED] Subject: Re: [Ntop] Filtering > 1. Try double quotes .... -B "" not -B '' ... depending on > which shell you're using, things get interpreted differently. Right now, I'm using the web Interface of Ntop to configure the Filter. > 2. Install tcpdump - it's a packet grabber which also uses > bpf. That way you can get a quick, real-time feedback on > tuning the filter: > > $ tcpdump -c 5 > > will show the 1st 5 packets > > $ tcpdump -c 5 -i eth1 > > will show the 1st 5 packets on eth1 > > $ tcpdump -c 5 -i eth1 net 192.168.1.0/24 > > will show the 1st 5 packets on eth1 for the 192.168.1.x > network (it's the same as your net mask syntax, just less to type) Ok, but when I use 'net 192.168.1.0/24' as a Filter, NOTHING is listed. Do you have any Idea what dcan be the reason for this? This should be the right Filter for me shouldn't it? What I want is to only log how much Traffic each Host in MY network creates. I don't care about the other side of the Connection. Hendrik _______________________________________________ Ntop mailing list [EMAIL PROTECTED] http://lists.ntop.org/mailman/listinfo/ntop _______________________________________________ Ntop mailing list [EMAIL PROTECTED] http://lists.ntop.org/mailman/listinfo/ntop
