> 1. Try double quotes .... -B "" not -B '' ... depending on 
> which shell you're using, things get interpreted differently.

Right now, I'm using the web Interface of Ntop to configure the Filter.

> 2. Install tcpdump - it's a packet grabber which also uses 
> bpf.  That way you can get a quick, real-time feedback on 
> tuning the filter:
>
> $ tcpdump -c 5
>
> will show the 1st 5 packets
>
> $ tcpdump -c 5 -i eth1
>
> will show the 1st 5 packets on eth1
>
> $ tcpdump -c 5 -i eth1 net 192.168.1.0/24
>
> will show the 1st 5 packets on eth1 for the 192.168.1.x 
> network (it's the same as your net mask syntax, just less to type)

Ok, but when I use 'net 192.168.1.0/24' as a Filter, NOTHING is listed.
Do you have any Idea what dcan be the reason for this?

This should be the right Filter for me shouldn't it?

What I want is to only log how much Traffic each Host in MY network
creates. I don't care about the other side of the Connection.

Hendrik 
_______________________________________________
Ntop mailing list
[EMAIL PROTECTED]
http://lists.ntop.org/mailman/listinfo/ntop

Reply via email to