On Tue, Feb 14, 2012 at 2:42 AM, Arnaud Quette <[email protected]> wrote: > Hi Matt, > > 2012/2/13 Matt Schulte <[email protected]>: >> Device manufacturer and name: >> Tripp-Lite OmniSmart500 >> >> upsc output: >> matt@backup:/etc$ sudo upsc tripplite >> battery.charge: 100 >> battery.test.status: Battery OK >> battery.voltage: 14.56 >> battery.voltage.nominal: 12 >> device.mfr: Tripp Lite >> device.model: OMNISMART500 >> device.type: ups >> driver.name: tripplite_usb >> driver.parameter.pollinterval: 2 >> driver.parameter.port: auto >> driver.version: 2.4.3 >> driver.version.internal: 0.20 >> input.voltage: 108.60 >> input.voltage.nominal: 120 >> output.voltage: 113.0 >> ups.debug.load_banks: 0 >> ups.debug.V: 31 30 32 30 58 58 0d '1020XX.' >> ups.delay.shutdown: 64 >> ups.firmware: F0966.A >> ups.firmware.aux: protocol 2001 >> ups.mfr: Tripp Lite >> ups.model: OMNISMART500 >> ups.power.nominal: 500 >> ups.productid: 0001 >> ups.status: OL >> ups.vendorid: 09ae >> matt@backup:/etc$ >> >> shutdown sequence testing results: >> Not sure exactly what you would like to see here, but after >> configuring everything and pulling the plug the system shut down >> correctly when the UPS dropped below 20%. > > we just need a confirmation as you did, plus the fact that the UPS was > powered off in the end. > >> /etc/log/daemon.log: >> Feb 13 10:11:47 backup upsmon[12058]: UPS tripplite@localhost battery is low >> Feb 13 10:11:47 backup upsd[11649]: Client [email protected] set FSD on UPS >> [trip >> plite] >> Feb 13 10:11:47 backup upsmon[12058]: Executing automatic power-fail shutdown >> Feb 13 10:11:47 backup upsmon[12058]: Auto logout and shutdown proceeding >> >> link: >> http://www.tripplite.com/en/products/model.cfm?txtModelID=21 > > thanks for your report. > I've just added an entry to the HCL. > For the sake of completion, could you please also send upsrw and upscmd > outputs? > Specifically what parameters do you want me to use when running upsrw and upscmd? Maybe this is what you are looking for?
matt@backup:~$ upscmd -l tripplite Instant commands supported on UPS [tripplite]: shutdown.return - Turn off the load and return when power is back matt@backup:~$ upsrw tripplite [ups.delay.shutdown] Interval to wait after shutdown with delay command (seconds) Type: STRING Value: 64 Matt Schulte _______________________________________________ Nut-upsdev mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/nut-upsdev
