Le jeudi 15 novembre 2007 à 12:06 -0600, Terry Hancock a écrit : > luc marschall wrote: > > Is there a way to extract the schematics data in a spreadsheet? > > > > I'm more used with schematics for wiring harness, but these drawings > > always contain a table of the connections from a connector to some > > others with pin numbers, wire numbers and theirs splices. > > That's called a "netlist". There's a link on the OGD1 "Components" page: > > """ > Verilog and EDIF netlists for the OGD1 board can be found here > (http://www.traversaltech.com/ogd1_images/ogd1_netlist.zip) > """ Nice but hard, though, interesting to decode. > > I'm uncertain what revision it's from, though. I'm also not positive > whether this is a netlist for the PCB or the OGA or both. There are two > files inside, called "OGD1.edf" and "OGD1.v". OGD1.v still mention: EC2-50_fpBGA672 and XP6 256 fpBGA so, that seems to be out-of-date > > The documentation on the wiki is still very disorganized. I'm currently > working on artwork and tables for the components, but I think we'll > probably want to give some thought to "information architecture" for the > documentation. :-) > > Then hopefully the answers to some of these questions will become easier > to find! (Quite a bit is already there now if you're willing to dig for it). > > Cheers, > Terry >
_______________________________________________ Open-graphics mailing list [email protected] http://lists.duskglow.com/mailman/listinfo/open-graphics List service provided by Duskglow Consulting, LLC (www.duskglow.com)
