On Nov 20, 12:52 pm, Mike Christie <[EMAIL PROTECTED]> wrote:
> [EMAIL PROTECTED] wrote:
> > I've got a replacement timeout set to 86400 but after losing
> > connection to the iscsi device it will fail typically in a minute or
> > so:
>
> > Nov 19 17:03:43 desktop kernel: connection4:0: detected conn error
> > (1011)
> > Nov 19 17:03:44 desktop iscsid: Kernel reported iSCSI connection 4:0
> > error (1011) state (3)
> > Nov 19 17:03:47 desktop iscsid: connect failed
> > (111)
> > Nov 19 17:04:26 desktop iscsid: connect failed
> > (113)
> > Nov 19 17:04:32 desktop iscsid: connect failed
> > (113)
> > Nov 19 17:04:39 desktop iscsid: connect failed (113)
> > Nov 19 17:04:45 desktop iscsid: connect failed (113)
> > Nov 19 17:04:49 desktop iscsid: connect failed (111)
> > Nov 19 17:04:53 desktop kernel: sd 8:0:0:1: [sdd] Synchronizing SCSI
> > cache
> > Nov 19 17:04:53 desktop kernel: sd 8:0:0:1: [sdd] Result:
> > hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK,SUGGEST_OK
> > Nov 19 17:04:53 desktop iscsid: conn 0 login rejected: initiator error
> > - target not found (02/03)
>
> > This is a stock fedora 9 install. My understanding is that iscsid
> > should continue to reconnect to the lost target for 86400 seconds
> > before finally failing.
>
> Are you using the iscsi-initiator-tools rpm in fedora 9 or are you using
> a open-iscsi.org tarball.
>
Currently - iscsi-initiator-utils-6.2.0.870-0.0.fc9.x86_64
> Normally the initiaitor would wait for replacement_timeout, but in older
> versions of open-iscsi, for certain errors like above where the target
> tells us that the target is now gone, we would give up early. We thought
> that targets returned that when the admin explicitly removed a target,
> so the admin probably wanted the initiator to not waste time trying to
> login. It turned out that this was wrong, so in newer versions we will
> continue to try to login until replacemet_timeout fires or until the
> admin runs iscsiadm to stop it.
I'll contact our packager and see if he can upgrade, if not I'll just
build a new one from source.
-Mike
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"open-iscsi" group.
To post to this group, send email to open-iscsi@googlegroups.com
To unsubscribe from this group, send email to [EMAIL PROTECTED]
For more options, visit this group at http://groups.google.com/group/open-iscsi
-~----------~----~----~----~------~----~------~--~---
