Hello, Could you please send the mib,snmpwalk output of EqualLogic.If it supports SMI-s could you post the mof files for the same.Or is there any other way(CLI Interface)to monitor equallogic...?
On Tue, Jul 28, 2009 at 11:42 PM, Mike Christie <micha...@cs.wisc.edu>wrote: > > Ulrich Windl wrote: > > On 28 Jul 2009 at 0:22, Moi meme wrote: > > > >> Hello, > >> > >> I am using a DELL Equallogic at work and I use a SLES10 SP2 (was > >> SP1 before last week-end), are they known problems with the SLES SP2 ? > >> I didn't notice any problem since the upgrade ! > > > > Same here: Only when the network has a problem, I see _many_ messages. > > Only problem (not iSCSI) is that he links in /dev/disk/by-id are not > reliably > > populated after boot. This may be a multipath/udev feature. As we boot > very > > rarely, I did not put much effort into examining this... > > > > What EQL firmware are you using? On the EQL box if you do a "show" > command it is in there. > > I was having a similar problem and updated the firmware to 4.1.4 and it > has been working for me now. For some reason the udev scsi_id callout > would send some commands to the target, and the target would never respond. > > > > --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "open-iscsi" group. To post to this group, send email to open-iscsi@googlegroups.com To unsubscribe from this group, send email to open-iscsi+unsubscr...@googlegroups.com For more options, visit this group at http://groups.google.com/group/open-iscsi -~----------~----~----~----~------~----~------~--~---
