I did install ant after I sent out the email. Then I got other make errors!
Should I run "git checkout..." first? Then run ./boot.sh and ./configure before running "make". Thanks. Humphrey On Mon, Dec 10, 2012 at 2:49 PM, Aaron Rosen <aro...@clemson.edu> wrote: > sudo apt-get install ant > > > On Mon, Dec 10, 2012 at 1:36 AM, Humphrey Lee <iramani...@gmail.com>wrote: > >> Hi Ali, >> >> Here what I did. >> 1. Download the flowvisor source. >> 2. Run "make" ==> error 127 >> >> Detail log: >> hon@ubuntu:/home/project/flowvisor$ ls >> AUTHORS doc Makefile README.syslog src.tests >> BUGS Documentation README RELEASE-NOTES UPGRADING >> build.xml INSTALL README.dev scripts utilities >> COPYING lib README.md src >> hon@ubuntu:/home/project/flowvisor$ git status >> # On branch 0.10-MAINT >> nothing to commit (working directory clean) >> hon@ubuntu:/home/project/flowvisor$ make >> ant >> make: ant: Command not found >> make: *** [all] Error 127 >> hon@ubuntu:/home/project/flowvisor$ >> >> I have Ubuntu Server 12.0.4 LTS version. >> >> Please advise. >> >> Thanks. >> Humphrey >> >> >> On Sun, Dec 9, 2012 at 9:57 PM, Ali Al-Shabibi < >> ali.al-shab...@stanford.edu> wrote: >> >>> [Please don't drop the list, responses here can be help to someone else] >>> >>> You can find the install from source instructions at >>> https://github.com/OPENNETWORKINGLAB/flowvisor/wiki/Installation-from-Source >>> . >>> >>> As you will see under 'Download and Build'; you only need to run 'make' >>> to build it and then follow the instruction on the rest of that page to >>> install it. >>> >>> Hope this helps, >>> >>> -- >>> Ali >>> >>> On Dec 9, 2012, at 2:31 PM, Humphrey Lee <iramani...@gmail.com> wrote: >>> >>> > Thank you for your quick response, Ali. >>> > >>> > I was trying to build from the source, instead of installing the >>> binary version. >>> > >>> > I tried to look for instructions to build the source code on the URL >>> you sent . I could only found the instruction to download the source, but >>> no instructions to build it. >>> > >>> > To build code successfully as I did for the older version, I think the >>> "git checkout -b ..." command must be executed. >>> > >>> > I appreciate your help. >>> > >>> > Regards, >>> > Humphrey >>> > >>> > Ali Al-Shabibi 於 2012年12月9日星期日寫道： >>> > (Please don't drop the list) >>> > >>> > To get the latest flowvisor, you should either checkout the master or >>> the 0.10-MAINT branch. Have a look at >>> https://github.com/OPENNETWORKINGLAB/flowvisor/wiki for installation >>> instructions. >>> > >>> > -- >>> > Ali Al-Shabibi >>> > >>> > On Dec 9, 2012, at 9:28, Humphrey Lee <iramani...@gmail.com> wrote: >>> > >>> >> Hi Ali, >>> >> >>> >> I downloaded version 0.10.0 source by "git clone git:// >>> github.com/OPENNETWORKINGLAB/flowvisor.git". >>> >> >>> >> I wanted to compile it, but I don't know how to specify this command >>> "git checkout -b fv0.4_of1.0 origin/deprecated/of-0.89", as an example >>> found on a OpenFlow document. What numbers should I use to replace those >>> fv0.4_of_1.0? Please advise. >>> >> >>> >> Thank you. >>> >> >>> >> Cheers, >>> >> Humphrey >>> >> >>> >> On Fri, Dec 7, 2012 at 9:10 PM, Ali Al-Shabibi < >>> ali.al-shab...@stanford.edu> wrote: >>> >> Hi Humphrey, >>> >> >>> >> The latest version of flowvisor can be obtained from >>> http://www.flowvisor.org. Let me know if you need help with the >>> installation. >>> >> >>> >> The FV versions on gitosis are very old and it looks like they are >>> pre-1.0 versions. You'll find the latest FV (0.10.0) at flowvisor.org. >>> >> >>> >> >>> >> Cheers. >>> >> >>> >> -- >>> >> Ali >>> >> >>> >> On Dec 7, 2012, at 11:00 AM, Humphrey Lee <iramani...@gmail.com> >>> wrote: >>> >> >>> >> > Hello Rob, >>> >> > >>> >> > What is the latest version of FlowVisor? Is it 0.8.0. >>> >> > >>> >> > I downloaded and compiled a version from git:// >>> gitosis.stanford.edu/, and tried to run it on Netgear GSM7328S. >>> However, I got this error message "tcp:my switch ip-address: 35380: version >>> negotiation failed: we support version 0x97 to. 0x97 inclusive but peer >>> supports no later than 0x01". >>> >> > >>> >> > Does this error message mean my flowvisor version is too old? Does >>> 0x97 mean that I need version 0.97? >>> >> > >>> >> > I appreciate for your help. >>> >> > >>> >> > Sincerely, >>> >> > Humphrey Lee (an OpenFlow developer) >>> >> > >>> >> > >>> >> > _______________________________________________ >>> >> > openflow-discuss mailing list >>> >> > openflow-discuss@lists.stanford.edu >>> >> > https://mailman.stanford.edu/mailman/listinfo/openflow-discuss >>> >> >>> >> >>> >>> >> >> _______________________________________________ >> openflow-discuss mailing list >> openflow-discuss@lists.stanford.edu >> https://mailman.stanford.edu/mailman/listinfo/openflow-discuss >> >> >
_______________________________________________ openflow-discuss mailing list openflow-discuss@lists.stanford.edu https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
