Humphrey, What where the errors you got after installing make?
The instructions here are the only commands you need to run. https://github.com/OPENNETWORKINGLAB/flowvisor/wiki/Installation-from-Source -- Ali Al-Shabibi On Dec 10, 2012, at 7:55, Humphrey Lee <iramani...@gmail.com> wrote: > I did install ant after I sent out the email. Then I got other make errors! > > Should I run "git checkout..." first? Then run ./boot.sh and ./configure > before running "make". > > Thanks. > Humphrey > > On Mon, Dec 10, 2012 at 2:49 PM, Aaron Rosen <aro...@clemson.edu> wrote: >> sudo apt-get install ant >> >> >> On Mon, Dec 10, 2012 at 1:36 AM, Humphrey Lee <iramani...@gmail.com> wrote: >>> Hi Ali, >>> >>> Here what I did. >>> 1. Download the flowvisor source. >>> 2. Run "make" ==> error 127 >>> >>> Detail log: >>> hon@ubuntu:/home/project/flowvisor$ ls >>> AUTHORS doc Makefile README.syslog src.tests >>> BUGS Documentation README RELEASE-NOTES UPGRADING >>> build.xml INSTALL README.dev scripts utilities >>> COPYING lib README.md src >>> hon@ubuntu:/home/project/flowvisor$ git status >>> # On branch 0.10-MAINT >>> nothing to commit (working directory clean) >>> hon@ubuntu:/home/project/flowvisor$ make >>> ant >>> make: ant: Command not found >>> make: *** [all] Error 127 >>> hon@ubuntu:/home/project/flowvisor$ >>> >>> I have Ubuntu Server 12.0.4 LTS version. >>> >>> Please advise. >>> >>> Thanks. >>> Humphrey >>> >>> >>> On Sun, Dec 9, 2012 at 9:57 PM, Ali Al-Shabibi >>> <ali.al-shab...@stanford.edu> wrote: >>>> [Please don't drop the list, responses here can be help to someone else] >>>> >>>> You can find the install from source instructions at >>>> https://github.com/OPENNETWORKINGLAB/flowvisor/wiki/Installation-from-Source. >>>> >>>> As you will see under 'Download and Build'; you only need to run 'make' to >>>> build it and then follow the instruction on the rest of that page to >>>> install it. >>>> >>>> Hope this helps, >>>> >>>> -- >>>> Ali >>>> >>>> On Dec 9, 2012, at 2:31 PM, Humphrey Lee <iramani...@gmail.com> wrote: >>>> >>>> > Thank you for your quick response, Ali. >>>> > >>>> > I was trying to build from the source, instead of installing the binary >>>> > version. >>>> > >>>> > I tried to look for instructions to build the source code on the URL you >>>> > sent . I could only found the instruction to download the source, but no >>>> > instructions to build it. >>>> > >>>> > To build code successfully as I did for the older version, I think the >>>> > "git checkout -b ..." command must be executed. >>>> > >>>> > I appreciate your help. >>>> > >>>> > Regards, >>>> > Humphrey >>>> > >>>> > Ali Al-Shabibi 於 2012年12月9日星期日寫道： >>>> > (Please don't drop the list) >>>> > >>>> > To get the latest flowvisor, you should either checkout the master or >>>> > the 0.10-MAINT branch. Have a look at >>>> > https://github.com/OPENNETWORKINGLAB/flowvisor/wiki for installation >>>> > instructions. >>>> > >>>> > -- >>>> > Ali Al-Shabibi >>>> > >>>> > On Dec 9, 2012, at 9:28, Humphrey Lee <iramani...@gmail.com> wrote: >>>> > >>>> >> Hi Ali, >>>> >> >>>> >> I downloaded version 0.10.0 source by "git clone >>>> >> git://github.com/OPENNETWORKINGLAB/flowvisor.git". >>>> >> >>>> >> I wanted to compile it, but I don't know how to specify this command >>>> >> "git checkout -b fv0.4_of1.0 origin/deprecated/of-0.89", as an example >>>> >> found on a OpenFlow document. What numbers should I use to replace >>>> >> those fv0.4_of_1.0? Please advise. >>>> >> >>>> >> Thank you. >>>> >> >>>> >> Cheers, >>>> >> Humphrey >>>> >> >>>> >> On Fri, Dec 7, 2012 at 9:10 PM, Ali Al-Shabibi >>>> >> <ali.al-shab...@stanford.edu> wrote: >>>> >> Hi Humphrey, >>>> >> >>>> >> The latest version of flowvisor can be obtained from >>>> >> http://www.flowvisor.org. Let me know if you need help with the >>>> >> installation. >>>> >> >>>> >> The FV versions on gitosis are very old and it looks like they are >>>> >> pre-1.0 versions. You'll find the latest FV (0.10.0) at flowvisor.org. >>>> >> >>>> >> >>>> >> Cheers. >>>> >> >>>> >> -- >>>> >> Ali >>>> >> >>>> >> On Dec 7, 2012, at 11:00 AM, Humphrey Lee <iramani...@gmail.com> wrote: >>>> >> >>>> >> > Hello Rob, >>>> >> > >>>> >> > What is the latest version of FlowVisor? Is it 0.8.0. >>>> >> > >>>> >> > I downloaded and compiled a version from git://gitosis.stanford.edu/, >>>> >> > and tried to run it on Netgear GSM7328S. However, I got this error >>>> >> > message "tcp:my switch ip-address: 35380: version negotiation failed: >>>> >> > we support version 0x97 to. 0x97 inclusive but peer supports no later >>>> >> > than 0x01". >>>> >> > >>>> >> > Does this error message mean my flowvisor version is too old? Does >>>> >> > 0x97 mean that I need version 0.97? >>>> >> > >>>> >> > I appreciate for your help. >>>> >> > >>>> >> > Sincerely, >>>> >> > Humphrey Lee (an OpenFlow developer) >>>> >> > >>>> >> > >>>> >> > _______________________________________________ >>>> >> > openflow-discuss mailing list >>>> >> > openflow-discuss@lists.stanford.edu >>>> >> > https://mailman.stanford.edu/mailman/listinfo/openflow-discuss >>>> >> >>>> >> >>> >>> >>> _______________________________________________ >>> openflow-discuss mailing list >>> openflow-discuss@lists.stanford.edu >>> https://mailman.stanford.edu/mailman/listinfo/openflow-discuss >
_______________________________________________ openflow-discuss mailing list openflow-discuss@lists.stanford.edu https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
