On 02/22/2017 05:51 PM, Anil Vishnoi wrote: > > > On Wed, Feb 22, 2017 at 5:04 PM, Jamo Luhrsen <[email protected] > <mailto:[email protected]>> wrote: > > no this is not that. > > csit regression was there, yes. it would show up as 35 failures in the > VPNservice > suites. but not what's happening here. > > here is the job from Abhijit's summary below: > > Patch Set 35: Build Unstable > https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/13/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/13/> > > expectation is 100% pass. There was probably an LLDP regression that > happened as well recently, but > the failures here are that and more. specifically starting here: > > > https://logs.opendaylight.org/releng/jenkins092/netvirt-csit-1node-openstack-newton-nodl-v2-gate-stateful-carbon/169/archives/log.html.gz#s1-s1-s1 > > <https://logs.opendaylight.org/releng/jenkins092/netvirt-csit-1node-openstack-newton-nodl-v2-gate-stateful-carbon/169/archives/log.html.gz#s1-s1-s1> > > seems our openstack instances didn't receive their ip addresses, which > usually means something > funky in the flow tables. > > we are talking about this gerrit right? > https://git.opendaylight.org/gerrit/#/c/51304/ > <https://git.opendaylight.org/gerrit/#/c/51304/> > > I was wondering if we could revert that, and then run these gate jobs on > the revert patch? > this is some really large thing though based on like 22 patches and tons > of LOC. Would I > just revert the top patch 51304? > > Jamo, But the last gate job that sam rum on this patch has no test failure, > so why do we want to run it again?
oh, I see... none of this makes sense then. I give up. :/ JamO > > > JamO > > > > On 02/22/2017 03:55 PM, Anil Vishnoi wrote: > > I think that regression was related to the CSIT test case and it's been > addressed. > > > > On Wed, Feb 22, 2017 at 3:51 PM, Jamo Luhrsen <[email protected] > <mailto:[email protected]> <mailto:[email protected] > <mailto:[email protected]>>> wrote: > > > > +Sam > > > > maybe not. just looking at "SUCCESS" in gerrit from a csit job > means it did not abort. > > the actual results of the robot suites need to be analyzed. > > > > we *think* there is a regression out there recently. maybe this > work caused it? > > > > JamO > > > > On 02/22/2017 03:39 PM, Anil Vishnoi wrote: > > > that's good news :-) > > > > > > On Wed, Feb 22, 2017 at 3:38 PM, Abhijit Kumbhare > <[email protected] <mailto:[email protected]> > <mailto:[email protected] <mailto:[email protected]>> > > <mailto:[email protected] <mailto:[email protected]> > <mailto:[email protected] > <mailto:[email protected]>>>> wrote: > > > > > > The CSIT shows the following (first a test-netvirt failure - > followed by success after Sam retriggered the > test today): > > > > > > Gerrit Code Review > > > > > > Change has been successfully merged by Jozef Bacigal > > > > > > 8:17 AM > > > > > > ↩ > > > > > > > > > Sam Hague > > > > > > Patch Set 35: test-openflowplugin-netvirt > > > > > > 8:54 AM > > > > > > ↩ > > > > > > > > > jenkins-releng > > > > > > Patch Set 35: Build Started > https://jenkins.opendaylight.org/releng/job/openflowplugin-merge-carbon/105/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-merge-carbon/105/> > > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-merge-carbon/105/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-merge-carbon/105/>> > > > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-merge-carbon/105/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-merge-carbon/105/> > > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-merge-carbon/105/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-merge-carbon/105/>>> > > > > > > 8:55 AM > > > > > > ↩ > > > > > > > > > jenkins-releng > > > > > > Patch Set 35: Build Started > > > https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/13/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/13/> > > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/13/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/13/>> > > > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/13/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/13/> > > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/13/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/13/>>> > > > > > > 8:55 AM > > > > > > ↩ > > > > > > > > > jenkins-releng > > > > > > Patch Set 35: Build Successful > https://jenkins.opendaylight.org/releng/job/openflowplugin-merge-carbon/105/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-merge-carbon/105/> > > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-merge-carbon/105/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-merge-carbon/105/>> > > > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-merge-carbon/105/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-merge-carbon/105/> > > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-merge-carbon/105/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-merge-carbon/105/>>> > : SUCCESS (skipped) Logs: > > > > https://logs.opendaylight.org/releng/jenkins092/openflowplugin-merge-carbon/105 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-merge-carbon/105> > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-merge-carbon/105 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-merge-carbon/105>> > > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-merge-carbon/105 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-merge-carbon/105> > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-merge-carbon/105 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-merge-carbon/105>>> > > > > > > 9:33 AM > > > > > > ↩ > > > > > > > > > jenkins-releng > > > > > > Patch Set 35: Build Unstable > > > https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/13/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/13/> > > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/13/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/13/>> > > > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/13/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/13/> > > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/13/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/13/>>> > : UNSTABLE (skipped) Logs: > > > > https://logs.opendaylight.org/releng/jenkins092/openflowplugin-patch-test-netvirt-carbon/13 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-patch-test-netvirt-carbon/13> > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-patch-test-netvirt-carbon/13 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-patch-test-netvirt-carbon/13>> > > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-patch-test-netvirt-carbon/13 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-patch-test-netvirt-carbon/13> > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-patch-test-netvirt-carbon/13 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-patch-test-netvirt-carbon/13>>> > > > > > > 12:14 PM > > > > > > ↩ > > > > > > > > > Sam Hague > > > > > > Patch Set 35: test-openflowplugin-netvirt > > > > > > 12:49 PM > > > > > > ↩ > > > > > > > > > jenkins-releng > > > > > > Patch Set 35: Build Started > > > https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/14/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/14/> > > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/14/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/14/>> > > > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/14/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/14/> > > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/14/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/14/>>> > > > > > > 12:53 PM > > > > > > ↩ > > > > > > > > > jenkins-releng > > > > > > Patch Set 35: Build Successful > > > https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/14/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/14/> > > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/14/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/14/>> > > > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/14/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/14/> > > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/14/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/14/>>> > : SUCCESS (skipped) Logs: > > > > https://logs.opendaylight.org/releng/jenkins092/openflowplugin-patch-test-netvirt-carbon/14 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-patch-test-netvirt-carbon/14> > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-patch-test-netvirt-carbon/14 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-patch-test-netvirt-carbon/14>> > > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-patch-test-netvirt-carbon/14 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-patch-test-netvirt-carbon/14> > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-patch-test-netvirt-carbon/14 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-patch-test-netvirt-carbon/14>>> > > > > > > 3:02 PM > > > > > > ↩ > > > > > > > > > > > > On Wed, Feb 22, 2017 at 3:19 PM, Anil Vishnoi > <[email protected] <mailto:[email protected]> > <mailto:[email protected] <mailto:[email protected]>> > <mailto:[email protected] <mailto:[email protected]> > <mailto:[email protected] > <mailto:[email protected]>>>> wrote: > > > > > > I think netvirt CSIT job had some failure and sam is > currently looking at it. He might send a mail if something is > > > failing because of this patch. > > > > > > On Wed, Feb 22, 2017 at 3:12 PM, Abhijit Kumbhare > <[email protected] <mailto:[email protected]> > <mailto:[email protected] <mailto:[email protected]>> > <mailto:[email protected] <mailto:[email protected]> > <mailto:[email protected] > <mailto:[email protected]>>>> wrote: > > > > > > So Tomas & folks, how are the tests for the netvirt > on this patch working? > > > > > > On Wed, Feb 22, 2017 at 1:22 AM, Anil Vishnoi > <[email protected] <mailto:[email protected]> > <mailto:[email protected] <mailto:[email protected]>> > <mailto:[email protected] <mailto:[email protected]> > <mailto:[email protected] > <mailto:[email protected]>>>> wrote: > > > > > > I triggered test-openflowplugin-netvirt as well > on this patch (as they use lot of nicira extension etc in > > > flow programming), if that passes it will give > more confidence on the stability of the changes. > > > > > > On Thu, Feb 16, 2017 at 11:57 PM, Tomáš Slušný > <[email protected] > > > <mailto:[email protected] > <mailto:[email protected]> <mailto:[email protected] > <mailto:[email protected]>>>> wrote: > > > > > > Thank you for explanation Luis. I missed step > 3 when I was going through test report. At least now I know > > > where to search for issue and after this last > one will be fixed, single layer model implementation will > > > be finally finished, because other than this > it is not causing any more regressions both with flag turned > > > off and on, at least CSIT tests are not > reporting any more regressions. > > > > > > Regards, > > > Tomas > > > ________________________________________ > > > Od: Luis Gomez [[email protected] > <mailto:[email protected]> <mailto:[email protected] > <mailto:[email protected]>> <mailto:[email protected] > <mailto:[email protected]> > > <mailto:[email protected] <mailto:[email protected]>>>] > > > Odoslané: 16. februára 2017 18:51 > > > Komu: Tomáš Slušný > > > Kópia: openflowplugin-dev > > > Predmet: Re: [openflowplugin-dev] Test > feedback > > > > > > Hi Tomas, > > > > > > The reconciliation test does the following: > > > > > > 0) Enable stale-flow entry feature (otherwise > step 5 will not work) > > > 1) add 2000 groups + 1000 flows (+10 > table-miss) > > > 2) Disconnect network > > > 3) Remove 20 groups + 10 flows > > > 4) Reconnect network > > > 5) Check groups and flows are deleted from > switch (total: 1980 groups + 1000 flows) > > > > > > So what happens with your patch is that the > flows (10) are being removed but the groups (20) are > > not, so > > > somehow your patch creates regression on the > stale-flow entry feature. > > > > > > BR/Luis > > > > > > > On Feb 16, 2017, at 6:57 AM, Tomáš Slušný > <[email protected]> wrote: > > > > > > > > Hi again Luis, > > > > > > > > I managed to get single layer serialization > to pretty stable state, but I have 1 quick > question, and > > > hopefully you will know the answer. > > > > > > > > According to test result from flow-services > CSIT here: > > > > > > > https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/512/archives/log.html.gz > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/512/archives/log.html.gz> > > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/512/archives/log.html.gz > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/512/archives/log.html.gz>> > > > > > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/512/archives/log.html.gz > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/512/archives/log.html.gz> > > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/512/archives/log.html.gz > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/512/archives/log.html.gz>>> > > > > my patch is causing 2 regressions, and that > is not correct count of groups after mininet and > > controller > > > restart. If I understand this right, in that > test, we are first sending > > > > group 1 100 times to each of 10 switches, > and then group 2 100 times to each of 10 switches, so > > that in > > > total makes 2000 groups that should be > present. And here is my question. > > > > The CSIT tests is checking that 1980 groups > should be present, and it was passing before, > but on my > > > changes, I have all 2000 groups present. So, > is there reason, why we are > > > > expecting there to have 20 groups missing? > > > > > > > > Regards. > > > > Tomas > > > > > > > > ________________________________________ > > > > Od: Tomáš Slušný > [[email protected]] > > > > Odoslané: 12. februára 2017 10:39 > > > > Komu: Luis Gomez > > > > Kópia: openflowplugin-dev > > > > Predmet: Re: [openflowplugin-dev] Test > feedback > > > > > > > > Thank you for testing it Luis. > > > > > > > > 1) I sort of expected this, because it was > a lot of code and there was a lot possibilities for > > > mistakes. I need to double check all > serializers and > > > > deserializers again. > > > > 2) Thank you for pointing this out, I > missed the config parameter that tells to skip > collecting table > > > features when rewriting device initialization > > > > logic. > > > > ________________________________________ > > > > Od: Luis Gomez [[email protected] > <mailto:[email protected]> <mailto:[email protected] > <mailto:[email protected]>> <mailto:[email protected] > <mailto:[email protected]> > > <mailto:[email protected] <mailto:[email protected]>>>] > > > > Odoslané: 11. februára 2017 2:48 > > > > Komu: Tomáš Slušný > > > > Kópia: openflowplugin-dev > > > > Predmet: Re: [openflowplugin-dev] Test > feedback > > > > > > > > Tomas, > > > > > > > > 1) New path enabled looks far from ready, I > see too many regressions: lack of switch info > in inventory, > > > flows not being pushed, stats not reported, > among other things. > > > > > > > > > > > > > https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/494/archives/log.html.gz > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/494/archives/log.html.gz> > > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/494/archives/log.html.gz > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/494/archives/log.html.gz>> > > > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/494/archives/log.html.gz > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/494/archives/log.html.gz> > > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/494/archives/log.html.gz > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/494/archives/log.html.gz>>> > > > > > > > > 2) With path disabled I see you are > bringing all the table features back so its takes very > long to > > > update inventory, topology and register the > connection: > > > > > > > > > > > > > https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/492/archives/log.html.gz#s1-s1-s1 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/492/archives/log.html.gz#s1-s1-s1> > > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/492/archives/log.html.gz#s1-s1-s1 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/492/archives/log.html.gz#s1-s1-s1>> > > > > > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/492/archives/log.html.gz#s1-s1-s1 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/492/archives/log.html.gz#s1-s1-s1> > > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/492/archives/log.html.gz#s1-s1-s1 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/492/archives/log.html.gz#s1-s1-s1>>> > > > > > > > > > > > https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/480/archives/log.html.gz#s1-s1 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/480/archives/log.html.gz#s1-s1> > > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/480/archives/log.html.gz#s1-s1 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/480/archives/log.html.gz#s1-s1>> > > > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/480/archives/log.html.gz#s1-s1 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/480/archives/log.html.gz#s1-s1> > > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/480/archives/log.html.gz#s1-s1 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/480/archives/log.html.gz#s1-s1>>> > > > > > > > > Please let me know if I can help with > anything else. > > > > > > > > On Feb 9, 2017, at 11:35 AM, Tomáš Slušný > <[email protected]<mailto:[email protected] > <mailto:[email protected]> > <mailto:[email protected] <mailto:[email protected]>> > > > <mailto:[email protected] > <mailto:[email protected]> > <mailto:[email protected] > <mailto:[email protected]>>>>> wrote: > > > > > > > > Hi Luis, > > > > > > > > this is gerrit link for model cleanup > (serialization of openflowplugin models directly) > > > https://git.opendaylight.org/gerrit/#/c/51304/ > <https://git.opendaylight.org/gerrit/#/c/51304/> > <https://git.opendaylight.org/gerrit/#/c/51304/ > <https://git.opendaylight.org/gerrit/#/c/51304/>> > > <https://git.opendaylight.org/gerrit/#/c/51304/ > <https://git.opendaylight.org/gerrit/#/c/51304/> > <https://git.opendaylight.org/gerrit/#/c/51304/ > <https://git.opendaylight.org/gerrit/#/c/51304/>>>. > > > > It needs to be tested with new path > disabled for regressions, and also with new path enabled. > > > > New path can be enabled/disabled with > use-single-layer serialization flag in > > > openflow-plugin-provider-config YANG: > > > > > > > > > https://git.opendaylight.org/gerrit/#/c/50819/8/openflowplugin-api/src/main/yang/openflow-provider-config.yang > > <https://git.opendaylight.org/gerrit/#/c/50819/8/openflowplugin-api/src/main/yang/openflow-provider-config.yang> > > > <https://git.opendaylight.org/gerrit/#/c/50819/8/openflowplugin-api/src/main/yang/openflow-provider-config.yang > > <https://git.opendaylight.org/gerrit/#/c/50819/8/openflowplugin-api/src/main/yang/openflow-provider-config.yang>> > > > > > <https://git.opendaylight.org/gerrit/#/c/50819/8/openflowplugin-api/src/main/yang/openflow-provider-config.yang > > <https://git.opendaylight.org/gerrit/#/c/50819/8/openflowplugin-api/src/main/yang/openflow-provider-config.yang> > > > <https://git.opendaylight.org/gerrit/#/c/50819/8/openflowplugin-api/src/main/yang/openflow-provider-config.yang > > <https://git.opendaylight.org/gerrit/#/c/50819/8/openflowplugin-api/src/main/yang/openflow-provider-config.yang>>> > > > > > > > > Regards, > > > > Tomas Slusny > > > > > > > > ________________________________________ > > > > Od: Luis Gomez [[email protected] > <mailto:[email protected]> <mailto:[email protected] > <mailto:[email protected]>> <mailto:[email protected] > <mailto:[email protected]> > > <mailto:[email protected] <mailto:[email protected]>>>] > > > > Odoslané: 9. februára 2017 19:28 > > > > Komu: openflowplugin-dev > > > > Predmet: [openflowplugin-dev] Test feedback > > > > > > > > Hi all, > > > > > > > > Infrastructure seems to be recovered from > last days issues, please send me the gerrit # > that require > > > full system test verification. > > > > > > > > FYI I already tried the switch connection > patch [1] and got some failures in the entity > owner test [2] > > > I have to investigate further and come back > to you. > > > > > > > > Also as I commented this morning, lately I > see a very often issue of switch not getting > table miss flow > > > when it connects to 3 cluster nodes [3]. I > will try to reproduce issue and open bug. > > > > > > > > BR/Luis > > > > > > > > [1] > https://git.opendaylight.org/gerrit/#/c/51500 > <https://git.opendaylight.org/gerrit/#/c/51500> > <https://git.opendaylight.org/gerrit/#/c/51500 > <https://git.opendaylight.org/gerrit/#/c/51500>> > > <https://git.opendaylight.org/gerrit/#/c/51500 > <https://git.opendaylight.org/gerrit/#/c/51500> > <https://git.opendaylight.org/gerrit/#/c/51500 > <https://git.opendaylight.org/gerrit/#/c/51500>>> > > > > [2] > > > > > https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/474/archives/log.html.gz > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/474/archives/log.html.gz> > > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/474/archives/log.html.gz > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/474/archives/log.html.gz>> > > > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/474/archives/log.html.gz > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/474/archives/log.html.gz> > > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/474/archives/log.html.gz > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/474/archives/log.html.gz>>> > > > > [3] > > > > > https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/469/archives/log.html.gz > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/469/archives/log.html.gz> > > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/469/archives/log.html.gz > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/469/archives/log.html.gz>> > > > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/469/archives/log.html.gz > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/469/archives/log.html.gz> > > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/469/archives/log.html.gz > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/469/archives/log.html.gz>>> > > > > > > > > > _______________________________________________ > > > > openflowplugin-dev mailing list > > > > [email protected] > <mailto:[email protected]> > <mailto:[email protected] > <mailto:[email protected]>> > > <mailto:[email protected] > <mailto:[email protected]> > <mailto:[email protected] > <mailto:[email protected]>>> > > > > > https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev> > > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev>> > > > > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev> > > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev>>> > > > > > > > > TomášSlušný > > > > Software Developer > > > > > > > > Sídlo / Mlynské Nivy 56 / 821 05 Bratislava > / Slovakia > > > > R&D centrum / Janka Kráľa 9 / 974 01 > Banská Bystrica / Slovakia > > > > +421 911 083 902 > <tel:%2B421%20911%20083%20902> <tel:%2B421%20911%20083%20902> > <tel:+421%20911%20083%20902> / > > [email protected] > > > > reception: +421 2 206 65 114 > <tel:%2B421%202%20206%2065%20114> > <tel:%2B421%202%20206%2065%20114> <tel:%2B421%202%20206%2065%20114> > > / www.pantheon.tech > > > > > > > > [logo] > > > > > > > > > > > > > > > > > > > > TomášSlušný > > > > Software Developer > > > > > > > > Sídlo / Mlynské Nivy 56 / 821 05 Bratislava > / Slovakia > > > > R&D centrum / Janka Kráľa 9 / 974 01 > Banská Bystrica / Slovakia > > > > +421 911 083 902 > <tel:%2B421%20911%20083%20902> <tel:%2B421%20911%20083%20902> > <tel:+421%20911%20083%20902> / > > [email protected] > > > > reception: +421 2 206 65 114 > <tel:%2B421%202%20206%2065%20114> > <tel:%2B421%202%20206%2065%20114> <tel:%2B421%202%20206%2065%20114> > > / www.pantheon.tech > > > > > > > > [logo] > > > > > > > > > > > > > _______________________________________________ > > > > openflowplugin-dev mailing list > > > > [email protected] > <mailto:[email protected]> > <mailto:[email protected] > <mailto:[email protected]>> > > <mailto:[email protected] > <mailto:[email protected]> > <mailto:[email protected] > <mailto:[email protected]>>> > > > > > https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev> > > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev>> > > > > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev> > > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev>>> > > > > > > > > > TomášSlušný > > > Software Developer > > > > > > Sídlo / Mlynské Nivy 56 / 821 05 Bratislava / > Slovakia > > > R&D centrum / Janka Kráľa 9 / 974 01 Banská > Bystrica / Slovakia > > > +421 911 083 902 > <tel:%2B421%20911%20083%20902> <tel:%2B421%20911%20083%20902> > <tel:+421%20911%20083%20902> / > > [email protected] > > > reception: +421 2 206 65 114 > <tel:%2B421%202%20206%2065%20114> > <tel:%2B421%202%20206%2065%20114> <tel:%2B421%202%20206%2065%20114> / > > www.pantheon.tech > > > > > > [logo] > > > > > > > > > > _______________________________________________ > > > openflowplugin-dev mailing list > > > [email protected] > <mailto:[email protected]> > <mailto:[email protected] > <mailto:[email protected]>> > > <mailto:[email protected] > <mailto:[email protected]> > <mailto:[email protected] > <mailto:[email protected]>>> > > > > https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev> > > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev>> > > > > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev> > > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev>>> > > > > > > > > > > > > > > > -- > > > Thanks > > > Anil > > > > > > _______________________________________________ > > > openflowplugin-dev mailing list > > > [email protected] > <mailto:[email protected]> > <mailto:[email protected] > <mailto:[email protected]>> > > <mailto:[email protected] > <mailto:[email protected]> > <mailto:[email protected] > <mailto:[email protected]>>> > > > > https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev> > > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev>> > > > > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev> > > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev>>> > > > > > > > > > > > > > > > > > > -- > > > Thanks > > > Anil > > > > > > > > > > > > > > > > > > -- > > > Thanks > > > Anil > > > > > > > > > _______________________________________________ > > > openflowplugin-dev mailing list > > > [email protected] > <mailto:[email protected]> > <mailto:[email protected] > <mailto:[email protected]>> > > > https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev> > > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev>> > > > > > > > > > > > > > -- > > Thanks > > Anil > > > > > -- > Thanks > Anil _______________________________________________ openflowplugin-dev mailing list [email protected] https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev
