no this is not that. csit regression was there, yes. it would show up as 35 failures in the VPNservice suites. but not what's happening here.
here is the job from Abhijit's summary below: Patch Set 35: Build Unstable https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/13/ expectation is 100% pass. There was probably an LLDP regression that happened as well recently, but the failures here are that and more. specifically starting here: https://logs.opendaylight.org/releng/jenkins092/netvirt-csit-1node-openstack-newton-nodl-v2-gate-stateful-carbon/169/archives/log.html.gz#s1-s1-s1 seems our openstack instances didn't receive their ip addresses, which usually means something funky in the flow tables. we are talking about this gerrit right? https://git.opendaylight.org/gerrit/#/c/51304/ I was wondering if we could revert that, and then run these gate jobs on the revert patch? this is some really large thing though based on like 22 patches and tons of LOC. Would I just revert the top patch 51304? JamO On 02/22/2017 03:55 PM, Anil Vishnoi wrote: > I think that regression was related to the CSIT test case and it's been > addressed. > > On Wed, Feb 22, 2017 at 3:51 PM, Jamo Luhrsen <[email protected] > <mailto:[email protected]>> wrote: > > +Sam > > maybe not. just looking at "SUCCESS" in gerrit from a csit job means it > did not abort. > the actual results of the robot suites need to be analyzed. > > we *think* there is a regression out there recently. maybe this work > caused it? > > JamO > > On 02/22/2017 03:39 PM, Anil Vishnoi wrote: > > that's good news :-) > > > > On Wed, Feb 22, 2017 at 3:38 PM, Abhijit Kumbhare > <[email protected] <mailto:[email protected]> > <mailto:[email protected] <mailto:[email protected]>>> wrote: > > > > The CSIT shows the following (first a test-netvirt failure - > followed by success after Sam retriggered the test today): > > > > Gerrit Code Review > > > > Change has been successfully merged by Jozef Bacigal > > > > 8:17 AM > > > > ↩ > > > > > > Sam Hague > > > > Patch Set 35: test-openflowplugin-netvirt > > > > 8:54 AM > > > > ↩ > > > > > > jenkins-releng > > > > Patch Set 35: Build Started > https://jenkins.opendaylight.org/releng/job/openflowplugin-merge-carbon/105/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-merge-carbon/105/> > > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-merge-carbon/105/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-merge-carbon/105/>> > > > > 8:55 AM > > > > ↩ > > > > > > jenkins-releng > > > > Patch Set 35: Build Started > > https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/13/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/13/> > > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/13/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/13/>> > > > > 8:55 AM > > > > ↩ > > > > > > jenkins-releng > > > > Patch Set 35: Build Successful > https://jenkins.opendaylight.org/releng/job/openflowplugin-merge-carbon/105/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-merge-carbon/105/> > > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-merge-carbon/105/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-merge-carbon/105/>> > : SUCCESS (skipped) Logs: > > > https://logs.opendaylight.org/releng/jenkins092/openflowplugin-merge-carbon/105 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-merge-carbon/105> > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-merge-carbon/105 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-merge-carbon/105>> > > > > 9:33 AM > > > > ↩ > > > > > > jenkins-releng > > > > Patch Set 35: Build Unstable > > https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/13/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/13/> > > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/13/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/13/>> > : UNSTABLE (skipped) Logs: > > > https://logs.opendaylight.org/releng/jenkins092/openflowplugin-patch-test-netvirt-carbon/13 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-patch-test-netvirt-carbon/13> > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-patch-test-netvirt-carbon/13 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-patch-test-netvirt-carbon/13>> > > > > 12:14 PM > > > > ↩ > > > > > > Sam Hague > > > > Patch Set 35: test-openflowplugin-netvirt > > > > 12:49 PM > > > > ↩ > > > > > > jenkins-releng > > > > Patch Set 35: Build Started > > https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/14/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/14/> > > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/14/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/14/>> > > > > 12:53 PM > > > > ↩ > > > > > > jenkins-releng > > > > Patch Set 35: Build Successful > > https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/14/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/14/> > > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/14/ > > <https://jenkins.opendaylight.org/releng/job/openflowplugin-patch-test-netvirt-carbon/14/>> > : SUCCESS (skipped) Logs: > > > https://logs.opendaylight.org/releng/jenkins092/openflowplugin-patch-test-netvirt-carbon/14 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-patch-test-netvirt-carbon/14> > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-patch-test-netvirt-carbon/14 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-patch-test-netvirt-carbon/14>> > > > > 3:02 PM > > > > ↩ > > > > > > > > On Wed, Feb 22, 2017 at 3:19 PM, Anil Vishnoi > <[email protected] <mailto:[email protected]> > <mailto:[email protected] <mailto:[email protected]>>> wrote: > > > > I think netvirt CSIT job had some failure and sam is currently > looking at it. He might send a mail if something is > > failing because of this patch. > > > > On Wed, Feb 22, 2017 at 3:12 PM, Abhijit Kumbhare > <[email protected] <mailto:[email protected]> > <mailto:[email protected] <mailto:[email protected]>>> wrote: > > > > So Tomas & folks, how are the tests for the netvirt on this > patch working? > > > > On Wed, Feb 22, 2017 at 1:22 AM, Anil Vishnoi > <[email protected] <mailto:[email protected]> > <mailto:[email protected] <mailto:[email protected]>>> wrote: > > > > I triggered test-openflowplugin-netvirt as well on this > patch (as they use lot of nicira extension etc in > > flow programming), if that passes it will give more > confidence on the stability of the changes. > > > > On Thu, Feb 16, 2017 at 11:57 PM, Tomáš Slušný > <[email protected] > > <mailto:[email protected] > <mailto:[email protected]>>> wrote: > > > > Thank you for explanation Luis. I missed step 3 > when I was going through test report. At least now I know > > where to search for issue and after this last one > will be fixed, single layer model implementation will > > be finally finished, because other than this it is > not causing any more regressions both with flag turned > > off and on, at least CSIT tests are not reporting > any more regressions. > > > > Regards, > > Tomas > > ________________________________________ > > Od: Luis Gomez [[email protected] > <mailto:[email protected]> <mailto:[email protected] > <mailto:[email protected]>>] > > Odoslané: 16. februára 2017 18:51 > > Komu: Tomáš Slušný > > Kópia: openflowplugin-dev > > Predmet: Re: [openflowplugin-dev] Test feedback > > > > Hi Tomas, > > > > The reconciliation test does the following: > > > > 0) Enable stale-flow entry feature (otherwise step > 5 will not work) > > 1) add 2000 groups + 1000 flows (+10 table-miss) > > 2) Disconnect network > > 3) Remove 20 groups + 10 flows > > 4) Reconnect network > > 5) Check groups and flows are deleted from switch > (total: 1980 groups + 1000 flows) > > > > So what happens with your patch is that the flows > (10) are being removed but the groups (20) are > not, so > > somehow your patch creates regression on the > stale-flow entry feature. > > > > BR/Luis > > > > > On Feb 16, 2017, at 6:57 AM, Tomáš Slušný > <[email protected]> wrote: > > > > > > Hi again Luis, > > > > > > I managed to get single layer serialization to > pretty stable state, but I have 1 quick question, and > > hopefully you will know the answer. > > > > > > According to test result from flow-services CSIT > here: > > > > https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/512/archives/log.html.gz > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/512/archives/log.html.gz> > > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/512/archives/log.html.gz > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/512/archives/log.html.gz>> > > > my patch is causing 2 regressions, and that is > not correct count of groups after mininet and > controller > > restart. If I understand this right, in that test, > we are first sending > > > group 1 100 times to each of 10 switches, and > then group 2 100 times to each of 10 switches, so > that in > > total makes 2000 groups that should be present. And > here is my question. > > > The CSIT tests is checking that 1980 groups > should be present, and it was passing before, but on my > > changes, I have all 2000 groups present. So, is > there reason, why we are > > > expecting there to have 20 groups missing? > > > > > > Regards. > > > Tomas > > > > > > ________________________________________ > > > Od: Tomáš Slušný [[email protected]] > > > Odoslané: 12. februára 2017 10:39 > > > Komu: Luis Gomez > > > Kópia: openflowplugin-dev > > > Predmet: Re: [openflowplugin-dev] Test feedback > > > > > > Thank you for testing it Luis. > > > > > > 1) I sort of expected this, because it was a lot > of code and there was a lot possibilities for > > mistakes. I need to double check all serializers and > > > deserializers again. > > > 2) Thank you for pointing this out, I missed the > config parameter that tells to skip collecting table > > features when rewriting device initialization > > > logic. > > > ________________________________________ > > > Od: Luis Gomez [[email protected] > <mailto:[email protected]> <mailto:[email protected] > <mailto:[email protected]>>] > > > Odoslané: 11. februára 2017 2:48 > > > Komu: Tomáš Slušný > > > Kópia: openflowplugin-dev > > > Predmet: Re: [openflowplugin-dev] Test feedback > > > > > > Tomas, > > > > > > 1) New path enabled looks far from ready, I see > too many regressions: lack of switch info in inventory, > > flows not being pushed, stats not reported, among > other things. > > > > > > > > > https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/494/archives/log.html.gz > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/494/archives/log.html.gz> > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/494/archives/log.html.gz > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/494/archives/log.html.gz>> > > > > > > 2) With path disabled I see you are bringing all > the table features back so its takes very long to > > update inventory, topology and register the > connection: > > > > > > > > > https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/492/archives/log.html.gz#s1-s1-s1 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/492/archives/log.html.gz#s1-s1-s1> > > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/492/archives/log.html.gz#s1-s1-s1 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-1node-flow-services-only-carbon/492/archives/log.html.gz#s1-s1-s1>> > > > > > > > https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/480/archives/log.html.gz#s1-s1 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/480/archives/log.html.gz#s1-s1> > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/480/archives/log.html.gz#s1-s1 > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/480/archives/log.html.gz#s1-s1>> > > > > > > Please let me know if I can help with anything > else. > > > > > > On Feb 9, 2017, at 11:35 AM, Tomáš Slušný > <[email protected]<mailto:[email protected] > <mailto:[email protected]> > > <mailto:[email protected] > <mailto:[email protected]>>>> wrote: > > > > > > Hi Luis, > > > > > > this is gerrit link for model cleanup > (serialization of openflowplugin models directly) > > https://git.opendaylight.org/gerrit/#/c/51304/ > <https://git.opendaylight.org/gerrit/#/c/51304/> > <https://git.opendaylight.org/gerrit/#/c/51304/ > <https://git.opendaylight.org/gerrit/#/c/51304/>>. > > > It needs to be tested with new path disabled for > regressions, and also with new path enabled. > > > New path can be enabled/disabled with > use-single-layer serialization flag in > > openflow-plugin-provider-config YANG: > > > > > > https://git.opendaylight.org/gerrit/#/c/50819/8/openflowplugin-api/src/main/yang/openflow-provider-config.yang > > <https://git.opendaylight.org/gerrit/#/c/50819/8/openflowplugin-api/src/main/yang/openflow-provider-config.yang> > > > <https://git.opendaylight.org/gerrit/#/c/50819/8/openflowplugin-api/src/main/yang/openflow-provider-config.yang > > <https://git.opendaylight.org/gerrit/#/c/50819/8/openflowplugin-api/src/main/yang/openflow-provider-config.yang>> > > > > > > Regards, > > > Tomas Slusny > > > > > > ________________________________________ > > > Od: Luis Gomez [[email protected] > <mailto:[email protected]> <mailto:[email protected] > <mailto:[email protected]>>] > > > Odoslané: 9. februára 2017 19:28 > > > Komu: openflowplugin-dev > > > Predmet: [openflowplugin-dev] Test feedback > > > > > > Hi all, > > > > > > Infrastructure seems to be recovered from last > days issues, please send me the gerrit # that require > > full system test verification. > > > > > > FYI I already tried the switch connection patch > [1] and got some failures in the entity owner test [2] > > I have to investigate further and come back to you. > > > > > > Also as I commented this morning, lately I see a > very often issue of switch not getting table miss flow > > when it connects to 3 cluster nodes [3]. I will try > to reproduce issue and open bug. > > > > > > BR/Luis > > > > > > [1] https://git.opendaylight.org/gerrit/#/c/51500 > <https://git.opendaylight.org/gerrit/#/c/51500> > <https://git.opendaylight.org/gerrit/#/c/51500 > <https://git.opendaylight.org/gerrit/#/c/51500>> > > > [2] > > > https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/474/archives/log.html.gz > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/474/archives/log.html.gz> > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/474/archives/log.html.gz > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/474/archives/log.html.gz>> > > > [3] > > > https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/469/archives/log.html.gz > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/469/archives/log.html.gz> > > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/469/archives/log.html.gz > > <https://logs.opendaylight.org/releng/jenkins092/openflowplugin-csit-3node-clustering-only-carbon/469/archives/log.html.gz>> > > > > > > _______________________________________________ > > > openflowplugin-dev mailing list > > > [email protected] > <mailto:[email protected]> > <mailto:[email protected] > <mailto:[email protected]>> > > > > https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev> > > > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev>> > > > > > > TomášSlušný > > > Software Developer > > > > > > Sídlo / Mlynské Nivy 56 / 821 05 Bratislava / > Slovakia > > > R&D centrum / Janka Kráľa 9 / 974 01 Banská > Bystrica / Slovakia > > > +421 911 083 902 <tel:%2B421%20911%20083%20902> > <tel:+421%20911%20083%20902> / > [email protected] > > > reception: +421 2 206 65 114 > <tel:%2B421%202%20206%2065%20114> <tel:%2B421%202%20206%2065%20114> > / www.pantheon.tech > > > > > > [logo] > > > > > > > > > > > > > > > TomášSlušný > > > Software Developer > > > > > > Sídlo / Mlynské Nivy 56 / 821 05 Bratislava / > Slovakia > > > R&D centrum / Janka Kráľa 9 / 974 01 Banská > Bystrica / Slovakia > > > +421 911 083 902 <tel:%2B421%20911%20083%20902> > <tel:+421%20911%20083%20902> / > [email protected] > > > reception: +421 2 206 65 114 > <tel:%2B421%202%20206%2065%20114> <tel:%2B421%202%20206%2065%20114> > / www.pantheon.tech > > > > > > [logo] > > > > > > > > > _______________________________________________ > > > openflowplugin-dev mailing list > > > [email protected] > <mailto:[email protected]> > <mailto:[email protected] > <mailto:[email protected]>> > > > > https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev> > > > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev>> > > > > > > TomášSlušný > > Software Developer > > > > Sídlo / Mlynské Nivy 56 / 821 05 Bratislava / > Slovakia > > R&D centrum / Janka Kráľa 9 / 974 01 Banská > Bystrica / Slovakia > > +421 911 083 902 <tel:%2B421%20911%20083%20902> > <tel:+421%20911%20083%20902> / > [email protected] > > reception: +421 2 206 65 114 > <tel:%2B421%202%20206%2065%20114> <tel:%2B421%202%20206%2065%20114> / > www.pantheon.tech > > > > [logo] > > > > > > _______________________________________________ > > openflowplugin-dev mailing list > > [email protected] > <mailto:[email protected]> > <mailto:[email protected] > <mailto:[email protected]>> > > > https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev> > > > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev>> > > > > > > > > > > -- > > Thanks > > Anil > > > > _______________________________________________ > > openflowplugin-dev mailing list > > [email protected] > <mailto:[email protected]> > <mailto:[email protected] > <mailto:[email protected]>> > > > https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev> > > > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev>> > > > > > > > > > > > > -- > > Thanks > > Anil > > > > > > > > > > > > -- > > Thanks > > Anil > > > > > > _______________________________________________ > > openflowplugin-dev mailing list > > [email protected] > <mailto:[email protected]> > > https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev > <https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev> > > > > > > > -- > Thanks > Anil _______________________________________________ openflowplugin-dev mailing list [email protected] https://lists.opendaylight.org/mailman/listinfo/openflowplugin-dev
