What does the openocd config file for your target/board have?
Perhaps it's stating that this region of memory is write only?
https://sourceforge.net/p/openocd/mailman/openocd-devel/?limit=100&style=flat&viewmonth=201507&viewday=16
________________________________
From: N K, Athira <athira...@honeywell.com>
Sent: Wednesday 11 July 2018 09:54
To: Tommy Murphy
Cc: OpenOCD-devel@lists.sourceforge.net
Subject: RE: [External] Re: [OpenOCD-devel] Fwd: Image Dump Query
Hello Tommy,
Thank you for the quick response.
Actually I could get an example command
dump_image empty.bin 0x8D000 185
But I get a response
Ignoring read of non readable area - Request address: 0x8D000, Request size
184. Bytes successfully read: 0
Is there anyway to make these sections readable? Or any other way to read back
the binary from the target.
Regards
Athira
From: Tommy Murphy [mailto:tommy_mur...@hotmail.com]
Sent: Wednesday, July 11, 2018 1:11 PM
To: athira.nai...@gmail.com; OpenOCD-devel@lists.sourceforge.net
Subject: [External] Re: [OpenOCD-devel] Fwd: Image Dump Query
What do you need other than what's already in the documentation?
http://openocd.org/doc/html/General-Commands.html
section 15.5
On athira nair n k <athira.nai...@gmail.com<mailto:athira.nai...@gmail.com>>,
11 Jul 2018 6:19 am wrote:
Hello,
I already put a query mail from my company email. But I have a doubt that the
response is getting blocked. Hence mailing again from personal email too. Quick
Support is highly appreciated.
I came across this command to read the image out from hardware.
Image loading commands
Command: dump_image filename address size
I am using WM-BAN-BM-33_EVB V3.0 board with olimex ARM-USB-TINY-H JTAG.
Can you provide me with an example and direction on how to read the flashed
image out from the hardware.
Regards
Athira
------------------------------------------------------------------------------
Check out the vibrant tech community on one of the world's most
engaging tech sites, Slashdot.org! http://sdm.link/slashdot
_______________________________________________
OpenOCD-devel mailing list
OpenOCD-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/openocd-devel
