On Wed, Jul 11, 2018 at 7:40 PM, Paul Fertser <fercer...@gmail.com> wrote: > On Wed, Jul 11, 2018 at 08:54:13AM +0000, N K, Athira wrote: >> But I get a response >> >> >> >> Ignoring read of non readable area - Request address: 0x8D000, Request size >> 184. >> Bytes successfully read: 0 > > git grep "Ignoring read" returns 0 matches to me. Are you sure you're > running OpenOCD? :) > > Paste a -d3 log please. >
Maybe the OP is using the old forked version from Broadcom (now this IoT related division becomes part of Cypress). The version seems to be very old. https://github.com/Broadcom/WICED-OpenOCD To OP: if that is the case, you should try the official OpenOCD. -- Xiaofan ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ OpenOCD-devel mailing list OpenOCD-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/openocd-devel