I've committed a couple of ARM11 fixes.
Is anyone testing ARM11 out there?
Single stepping seems to be broken.
Resume & halt appears to work.
> reset halt
JTAG device found: 0x2b900f0f (Manufacturer: 0x787, Part: 0xb900, Version: 0x2)
JTAG device found: 0x07b3601d (Manufacturer: 0x00e, Part: 0x7b36, Version: 0x0)
Device does not have IDCODE
JTAG device found: 0x2190101d (Manufacturer: 0x00e, Part: 0x1901, Version: 0x2)
Error validating JTAG scan chain, IR mismatch, scan returned 0x0c2011
Could not validate JTAG chain, continuing anyway...
found ARM1136
r0 00000000 (INVALID)
r1 43f88000 (INVALID)
r2 43f90000 (INVALID)
r3 00000001 (INVALID)
r4 000069a6 (INVALID)
r5 00000000 (INVALID)
r6 00000000 (INVALID)
r7 1fffc834 (INVALID)
r8 00000000 (INVALID)
r9 00000001 (INVALID)
r10 00000002 (INVALID)
r11 000000f0 (INVALID)
r12 00000001 (INVALID)
sp 1fffff70 (INVALID)
lr 00000000 (INVALID)
pc 0040569c (INVALID)
cpsr 200001d3 (INVALID)
dscr 00004003 (INVALID)
Debug entry: JTAG HALT
target state: halted
> setp
Runtime error, file "?", line 1:
Unknown command: setp
> step
STEP PC 0040569c
dscr 00004007 (00004003)
target state: halted
> step
STEP PC 0040569c
target state: halted
> step
STEP PC 0040569c
target state: halted
--
Øyvind Harboe
http://www.zylin.com/zy1000.html
ARM7 ARM9 XScale Cortex
JTAG debugger and flash programmer
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
