Hi all, On Mon, Aug 25, 2008 at 3:32 PM, Alan Carvalho de Assis <[EMAIL PROTECTED]> wrote: > Hi Oyvind, > I am testing it with J-Link and still getting some problems. > > Vincent, what JTAG hardware are you using?
I am testing with a jtagkey, but also expermimenting some problems with svn revision from tonight. Reset halt does not seem to work for me: Here is what I get when I issue the reset halt command through telnet: [EMAIL PROTECTED]:~/openocd/trunk/src$ ./openocd -f target/target/mx31.cfg -f target/interface/jtagkey.cfg Open On-Chip Debugger 1.0 (2008-08-25-22:50) svn:968M $URL: svn://svn.berlios.de/openocd/trunk/src/openocd.c $ jtag_speed: 10 Info: JTAG device found: 0x2b900f0f (Manufacturer: 0x787, Part: 0xb900, Version: 0x2) Info: JTAG device found: 0x07b3601d (Manufacturer: 0x00e, Part: 0x7b36, Version: 0x0) Warning:Device does not have IDCODE Info: JTAG device found: 0x1190101d (Manufacturer: 0x00e, Part: 0x1901, Version: 0x1) Error: Error validating JTAG scan chain, IR mismatch, scan returned 0x0c2011 Error: Could not validate JTAG chain, continuing anyway... Info: found ARM1136 Warning:no telnet port specified, using default port 4444 Warning:no gdb port specified, using default port 3333 Warning:no tcl port specified, using default port 6666 Info: accepting 'telnet' connection from 0 Error: JTAG communication failure, check connection, JTAG interface, target power etc. Error: trying to validate configured JTAG chain anyway... Error: Error validating JTAG scan chain, IR mismatch, scan returned 0x000000 Error: Could not validate JTAG chain, continuing anyway... Warning:value captured during scan didn't pass the requested check: captured: 0x00 check_value: 0x01 check_mask: 0x1f Warning:in_handler reported a failed check Runtime error, file "?", line 1: What command line do you use Oyvind ? Regards Valentin _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
