On Tue, Aug 26, 2008 at 1:55 PM, Valentin Longchamp <[EMAIL PROTECTED]> wrote: > On Tuesday 26 August 2008 12.21:35 Øyvind Harboe wrote: >> On Tue, Aug 26, 2008 at 12:09 PM, Valentin Longchamp >> > OK. I have noticed working with RealView ICE that mx31ads board JTAG >> > chain is not optimal. Do you work with an ADS board Øyvind ? I will try >> > on our board, but I only have one available at work, and I usually work >> > on openOCD at home. >> >> What's an ADS board? >> > > It's the dev board that was produced by Freescale at the very beginning of the > i.MX31 availability. I was just wondering with what board you were doing your > ARM11 tests ?
I don't know :-) "Three stack debug board revC" it says... I think there are 4-5 PCBs that you can fit together. I only put together enough boards to talk to the CPU via JTAG and I didn't read any manuals or look at the labling of the box it came in even :-) At this point I'll be happy to pursue sharp bug reports on ARM11, but to make serious progress on ARM11 I'd have to set aside time to dive into it... -- Øyvind Harboe http://www.zylin.com/zy1000.html ARM7 ARM9 XScale Cortex JTAG debugger and flash programmer _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
