I am currently busy with other work and will probably look into ARM11 again later this year.
Single stepping worked on 1176 last time I used it. Michael Øyvind Harboe wrote: > I've committed a couple of ARM11 fixes. > > Is anyone testing ARM11 out there? > > Single stepping seems to be broken. > > Resume & halt appears to work. > >> reset halt > JTAG device found: 0x2b900f0f (Manufacturer: 0x787, Part: 0xb900, Version: > 0x2) > JTAG device found: 0x07b3601d (Manufacturer: 0x00e, Part: 0x7b36, Version: > 0x0) > Device does not have IDCODE > JTAG device found: 0x2190101d (Manufacturer: 0x00e, Part: 0x1901, Version: > 0x2) > Error validating JTAG scan chain, IR mismatch, scan returned 0x0c2011 > Could not validate JTAG chain, continuing anyway... > found ARM1136 > r0 00000000 (INVALID) > r1 43f88000 (INVALID) > r2 43f90000 (INVALID) > r3 00000001 (INVALID) > r4 000069a6 (INVALID) > r5 00000000 (INVALID) > r6 00000000 (INVALID) > r7 1fffc834 (INVALID) > r8 00000000 (INVALID) > r9 00000001 (INVALID) > r10 00000002 (INVALID) > r11 000000f0 (INVALID) > r12 00000001 (INVALID) > sp 1fffff70 (INVALID) > lr 00000000 (INVALID) > pc 0040569c (INVALID) > cpsr 200001d3 (INVALID) > dscr 00004003 (INVALID) > Debug entry: JTAG HALT > target state: halted >> setp > Runtime error, file "?", line 1: > Unknown command: setp >> step > STEP PC 0040569c > dscr 00004007 (00004003) > target state: halted >> step > STEP PC 0040569c > target state: halted >> step > STEP PC 0040569c > target state: halted > _______________________________________________ Openocd-development mailing list [email protected] https://lists.berlios.de/mailman/listinfo/openocd-development
