Add $_FLASHNAME variable to update 'nand device' command syntax.
Signed-off-by: Zachary T Welch <[email protected]>
---
tcl/board/dm355evm.cfg | 6 ++++--
tcl/board/openrd.cfg | 3 ++-
tcl/board/sheevaplug.cfg | 3 ++-
3 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/tcl/board/dm355evm.cfg b/tcl/board/dm355evm.cfg
index 8b126fa..1f814b2 100644
--- a/tcl/board/dm355evm.cfg
+++ b/tcl/board/dm355evm.cfg
@@ -191,8 +191,10 @@ proc dm355evm_init {} {
# you either (a) have 'new' DM355 chips, with boot ROMs that don't need to
# use "hwecc4_infix" for the UBL; or else (b) aren't updating anything that
# needs infix layout ... like an old UBL, old U-Boot, old MVL kernel, etc.
-nand device davinci $_TARGETNAME 0x02000000 hwecc4 0x01e10000
-nand device davinci $_TARGETNAME 0x02004000 hwecc4 0x01e10000
+set _FLASHNAME $_CHIPNAME.boot
+nand device $_FLASHNAME davinci $_TARGETNAME 0x02000000 hwecc4 0x01e10000
+set _FLASHNAME $_CHIPNAME.flash
+nand device $_FLASHNAME davinci $_TARGETNAME 0x02004000 hwecc4 0x01e10000
# FIXME
# - support writing UBL with its header (new layout only with new ROMs)
diff --git a/tcl/board/openrd.cfg b/tcl/board/openrd.cfg
index a77dcdb..e8784d4 100644
--- a/tcl/board/openrd.cfg
+++ b/tcl/board/openrd.cfg
@@ -11,7 +11,8 @@ $_TARGETNAME configure \
arm7_9 dcc_downloads enable
# this assumes the hardware default peripherals location before u-Boot moves it
-nand device orion 0 0xd8000000
+set _FLASHNAME $_CHIPNAME.flash
+nand device $_FLASHNAME orion 0 0xd8000000
proc openrd_init { } {
diff --git a/tcl/board/sheevaplug.cfg b/tcl/board/sheevaplug.cfg
index 62b78ee..afd621a 100644
--- a/tcl/board/sheevaplug.cfg
+++ b/tcl/board/sheevaplug.cfg
@@ -11,7 +11,8 @@ $_TARGETNAME configure \
arm7_9 dcc_downloads enable
# this assumes the hardware default peripherals location before u-Boot moves it
-nand device orion 0 0xd8000000
+set _FLASHNAME $_CHIPNAME.flash
+nand device $_FLASHNAME orion 0 0xd8000000
proc sheevaplug_init { } {
--
1.6.4.4
_______________________________________________
Openocd-development mailing list
[email protected]
https://lists.berlios.de/mailman/listinfo/openocd-development
