Sorry for the added traffic :) I forgot to mention OpenPBX was returning to the ATA something along the lines of "Not acceptable here" essentially rejecting the ATA's T.38 request, canreinvite=no was not present, then I added in canreinvite=yes
The ATA is AudioCodes MP-202, which I would not recommend, they violate the GPL and for months they denied it even ran Linux. On 2/5/07, Andrew Joakimsen <[EMAIL PROTECTED]> wrote: > Do you use T38Gateway? I've tried SIP (T.38) -> OpenPBX -> IAX2 -> > Asterisk -> PRI > > PRI -> Asterisk -> IAX -> OpenPBX -> SIP T.38 > > And it never works. > > I see with "sip debug" that the ATA is sending a T38 request, but > nothing back from OpenPBX the call just proceeds as Ulaw, the > T38SwitchOver doesnt help either. Is there any speed limiation? The > ATA is requesting 14,400kbps. > > Also I am wondering if OpenPBX is 100% compatible with Asterisk > configuration files, and if there is any plan to change that? > > On 2/5/07, Checkov, Andrew <[EMAIL PROTECTED]> wrote: > > > I have stable T.38 operation between any pair of devices. All of them > > (except) Cisco works thru the NAT with disabled Reinvite. > _______________________________________________ Openpbx-users mailing list [email protected] http://lists.openpbx.org/mailman/listinfo/openpbx-users
