man, 05,.02.2007 kl. 04.34 -0500, skrev Andrew Joakimsen: > > I tried T38Gateway in following modes: > > > > PRI -> Cisco AS5350 -> SIP -> OpenPBX -> SpanDSP > > ATA -> SIP -> OpenPBX -> SpanDSP > > Are you actually using the T38Gateway application? The AS5350 should > support T.38 itself (and there's no reason not to use it) and the 2nd > setup I assume you are using TxFax/RxFax? > > > > I'm going to setup ZAP hardware at openpbx.org box and test this > > issue. > > > I don't think it should be any different than sending the fax as ulaw > over the LAN which is what I am trying to do. > > When I dial from the IAX to the SIP ATA via T38Gateway I get: > > WARNING[1094269248] app_t38gateway.c: Bridging frames > > When I dial from the SIP ATA to the IAX via T38Gateway I get: > > ERROR[1094003008] app_t38gateway.c: failed to get remote_channel > IAX2/isphone-out/13525054732
This is possibly because T38Gateway only works with SIP. You should not use T38Gateway with IAX. OpenPBX.org does not support T.38 with anything else than IAX. Connect your OpenPBX.org servers with SIP and give it a new shot. > _______________________________________________ > Openpbx-users mailing list > [email protected] > http://lists.openpbx.org/mailman/listinfo/openpbx-users _______________________________________________ Openpbx-users mailing list [email protected] http://lists.openpbx.org/mailman/listinfo/openpbx-users
