Hello Andrew, Monday, February 5, 2007, 11:50:20 AM, you wrote:
AJ> Do you use T38Gateway? I've tried SIP (T.38) -> OpenPBX -> IAX2 -> Asterisk ->> PRI PRI ->> Asterisk -> IAX -> OpenPBX -> SIP T.38 AJ> And it never works. I tried T38Gateway in following modes: PRI -> Cisco AS5350 -> SIP -> OpenPBX -> SpanDSP ATA -> SIP -> OpenPBX -> SpanDSP It works only when I has ulaw codec and dtmf=inband - as described here http://wiki.openpbx.org/tiki-index.php?page=Faxing%20with%20Openpbx.org I'm going to setup ZAP hardware at openpbx.org box and test this issue. Also I'm going to connect two openpbx.org boxes with IAX and test T.38 passthrough between boxes - I expect it should work. I will report about both configurations in 2-2 days. -- Best regards, Andrew mailto:[EMAIL PROTECTED] _______________________________________________ Openpbx-users mailing list [email protected] http://lists.openpbx.org/mailman/listinfo/openpbx-users
